Page 1: CURRENT MODS, AND WISH LIST
Page 2: PAINTED CALIPER, ENGINE COVER, PERFORMANCE MUFFLER, OEM FOG LIGHTS, SHIFT BOOT ADD-ON, AIT CARBON FIBER HOOD
PAGE 3: 2004 TL LSD 6-SPEED SWAP!!! (PICS COMING JAN 16, 2010)
Page 4: NEW DIY DOOR PANELS, DIY BLACKHOUSED HEADLIGHTS, DIY BLUE GAUGES
Page 5: NEW KAMINARI LIP KIT PICTURES!!!! DONE!!!!!!
Page 6: New DIY GOLD PAINTED WHEELS, DIY E-BRAKE & BOOT,DIY BLUE AND GOLD INTERIOR TRIM, DIY BRONZE PAINTED STOCK WHEELS, CARBON FIBER DASH KIT(COMIN SOON)!!!!, DIY ENGINE DRESS UP KIT!!
CHECKOUT HIS SIMPLE DIY:
Custom Door Panel!!!!!!!!
MARCH 2, 2009
ITEMS NEEDED:
scissor, cloth(whatever material u like), butter knife
Well basically u need the scissors to cut the fabric about 2' by 1' 1/2". then place the material on the door panel. slowly and firmly use the butter knife to wedge the edges of the fabric into the corners of the door panel.( the door crease might be tight so try prying the door panel slightly to ease the fabric between the crease). Also cut excess fabric, but make sure to leave a 1/2" to 1" for tucking between the crease. BE PATIENT AND YOUR PANEL WILL LOOK AWESOME!!!!!!
BEFORE: AFTER:
ANOTHER DIY!!! BLACKHOUSED STOCK HEADLIGHTS!!!
HEADLIGHT CAME IN!!! I USED THIS SITE AS A REFERENCE AS TO HOW TO BLACKHOUSE MY HEADLIGHT. http://www.members.tripod.com/megatron01/index_files/Page338.htm.
ITEMS NEEDED:
- 1 CAN SPRAY PAINT
- 1 CAN PRIMER (I USED RUSTOLEUM SANDABLE SPRAY PRIMER)
- OVEN WITH OVEN MITTS AND TOWELS
- FLATHEAD SCREWDRIVER
- PHILLIPS SCREWDRIVER
STEP 1: REMOVE HEADLIGHT FROM CAR. SIMPLE JUST COMMON SENSE
STEP2: REMOVE THE RUBBER PLUGS THAT COVER THE BULB OPENINS. THERE ARE TWO PER HEADLIGHT, AND REMOVE BULB AS WELL.
STEP 3: NOW PREHEAT OVEN TO 200 DEGREES FARENHEIT. AND PLACE HEADLIGHT ON A TOWEL AND HEAT HEADLIGHT FOR 20 MINUTES.
STEP 4: AFTER 20 MINUTES, REMOVE HEADLIGHTS AND USE A DISPOSABLE FLAT HEAD SCREWDRIVER TO SLOWLY PRY THE HEADLIGHT CASE OPEN. (BE CAREFUL NOT TO BREAK CLIPS ON HEADLIGHT LENSE). BE PATIENT.
STEP 5: REMOVE THE INNER HOUSING THAT HOLDS THE TURNSIGNAL POCKET, U WILL NEED THE PHILLIPS SCREWDRIVER TO REMOVE THE INNER HOUSING FROM THE LENSE. (THIS IS WHAT U WILL BE PAINTING.)
STEP 6: SRAY EVEN COATS OF PRIMER ON THIS( ABOUT 2 LIGHT COATS)
STEP 7: AFTER PRIMER DRIES, SPRAY PAINT ON THE HOUSING, (ABOUT 2 LIGHT COATS)
STEP 8: REVERSE ALL THE STEPS AND USE THE OVEN TO SOFTEN THE GLUE, AND WITH THE HELP OF CLAMPS, OR PLIERS SQUEEZE THE SEAL SHUT.
U ARE FINISHEEEDDD!!!!!
April 13, 2009- New picture of the blackhoused headlight!!!
Finished product:
Next DIY: Blue gauges!!! April 21, 2009
i was bored today so i decided to make my gauges blue! the only materials needed really is blue transparent film(u can find on ebay), and a tool kit! Instead of writing a full write up of how i did it i will supply a link that has VERY detailed steps on how to do this.
http://www.cardomain.com/ride/2138131
Click This link---^
FINAL PRODUCT!!!
APRIL 28, 2009
INSTALLED BLUE/ CARBON FIBER PEDAL SET!
FINAL PRODUCT:
