My 1991 S10
Project in Progress
UpDated 11-14-09
i just startin to fix all the loose ends
the new Roll Pan came in today.
now i just need a good bed to mold it into.
the drivers side upper control arm is hiting the headder. i got some nice tubular upper control arms On Ebay. for $199. that should fix it
the coolong fan i got is not going to work it hits the water pump. so i dont know what i am going to use at this point.
11-14-09
New Taillights Came in Today. and got a new bed, the bed needs some work but its not as bad as the one i have now. i will be posting pics of the work on the bed as soon as i get started on it
11-16-09
New Tubuler Upper Controll Arms are here. Will Post Pictures On Truck Soon.
I got two 12" Cooling Fans. i am going to try out before i go with a clutch Fan.
Thanks Every Body For All the Comment on the Truck
I've had my 91 s10 for 2 years with a 4 banger in it. it worked good at that time, but all them times of drag racing with a 4 banger " losing most of them". i killed it. so i let it sit up for sometime.
Now lots of time and money later, i am still working on it everyday after work. doing what little i can do to get it the way i want it to be.
so far i have my new motor in it. and started it, "sounds good with open headers".
10-5-08
just built the rear end for it "its a posi with disc brakes". now i just need to put it in.
10-8-08
I have put the front end back together, with a new 1.7/8"s sway bar. new springs belltech's, new Bilstein Shocks, new sloted and drilled rotors, and new powdercoated red calipers
10-12-08
we got the rearend in last night, with the new 3" drop leaf springs. and the new Disc Brakes and calipers. looks good to me. but i think it needs to be 1" lower in the back. well i guess we will have to see what works the best.
We fixed all the old wiring under the dash. "doing it the right way. works out alot better than tape and zipties."
got the radiator support painted. when to put it on, and its Bent. well thats just great more. money i have to spend that i dont have.
at the way its going now i will have a show truck when i am done.
10-13-08
we went ahead and dropped it down 1 more inch in the back.
got the look i was going for now.
10-22-08
got the pulleys Backfrom powder coat. had there done in blue
and do they look good.
post pic soon.
11-14-08
New Front Brakes
12-1-08
Powdercoated parts
5-19-09
After a long time i have started back on the s10
i have moved the truck to my shop at work to get more done.
Now the valve covers on the motor and the belt set up in mockup. i am going to have to space the pws bracket out and about 1/4. to line everything up.
Starting puting on the new mirrows, but i am going to have to do some drilling to make them work. oh well i think they will look good when everything is said and done.
Just after i set the alignament
2" bell tech drop spindles
Old Wheels
Pages
1. old pics, 2. pulling out the motor, 3. New motor out of camaro, 4. motor in. 5. disc brakes
Thanks to everyone that made my s10 #1 no Cardomain. in 2008
