___/::Spring/ 2009 ::\____________________  

91 Acura Integra , 91 honda Accord .

             HONDA POWER.   JDM

 ___/::INSIDE::\________________________

     Kenwood kdc x792- CD player

     Kenwood component set front and back

     Phoenix gold 2 10s/amp 

     USB drive in the dash

___/::TAILS ::\____________________________

                      a spec exhust a lot loud too (jdm)

__/:: SHORT SHIF T PROJECT ::\________________________    

  90 93 ho nda Accord  5 speed .

- tools (you can figure that out).

- small pipe clamp, lock washers, washers and nuts that will fit the clamp bolts. all found at a local hardware store.

   first remove arm rest screws, then remove arm rest itself and toss it in the back , then remove screws from the center consell surounding shifter Nob, remove and toss in the back as well. you will have to make a small cut in that center consell for clearance issues but will get to that later.

 once all that is done you will need to clamp that pipe clamp around the shaft of the shifter, (make sure it is above the small ball on the shaft). the higher up you go with the clamp the shorter the throw will be, but thats where the clearance issue comes in.  once you have the clamp semi mounted remove the cotter pin and washer for the passenger side cable and reatach it to the new clamp bolt and then screw on your washers and nuts. make sure its all tight.

 I hope everone can figure this out with the pics, this really works try it.

now the clearance issue you will have to cut in to a part of your center councell if you aint any good at it let some one else. there is also a bracket which is made of tin it needs to be cut as well. some pics

  not bad for $8.34 cad.  give it a shot i know you wont be disapointed

__/::Summer/Winter 2008 ::\____________________________

  "1991 honda accord EX-R"  

stock whe els, Lowered.

___/:: NEXT PROJECT ::\__________________________

  this is my Accord and me " Josh ",