TtotheP’s 1996 Nissan 240SX

SOUND SYSTEM  Pioneer DEH-P6800MP deckhttp://www.crutchfield.com/S-fBvzVqolq3V/p_130DEHP680/Pioneer-DEH-P6800MP.html

HOW TOTake professional photos Tired of over-exposed photos? Is the sun's glare ruining all your Pics? Here is a quick and easy fix that will give you professional looking photos that look like they belong in a magazine.   Before                   After

UPDATEnew pics / new mods***9/28/10MAINTENANCE1: replaced spark plugs w/ some NGK platinum plugs2: replaced old, worn wires w/ Bosch wiresI would strongly recommend these products (so far) they have performed very well with absolutely no trouble.

Simply place the filter back in, clip the top portion of the airbox back on and take it for a test drive.BENEFITS:1: Short ram intake2: Deep aggresive tone3: Added Hp and Tq4: Oh ya, and its cheap.---------------------------------------------------***9/28/10MODIFIEDShifter Got tired of looking at the stock auto shifter so i decided to install my MoMo shift knob and boot to make it look nice, and also look like its a manual trans.  WHAT TO DO:1: Remove Shifter trim piece2: Relocate the Over drive button3: Remove old shifter.4: Remove white plastic slanted piece on top of    shifter 4: Install new shifter and boot and replace    shifter trim piece.     Before                 After

300zx TT fuel filter UPDATE  7.7.12The beginning of a massive overhaul on the carHeres the specs-D2 coilovers-Apexi dual canister exhaust (one off)-Circuit sports inner/outer tie rods-Energy suspension polyurethane bushingsmore...

1996 NISSAN 240SX SE ------------------------------------------------------------------------------------------------------------------- Whats up CarDomain.com ? Whether you stumbled upon my car's profile by accident, or it is because you are an avid fan of the 240, and therefore have good taste , then welcome to my page.What you have before you is an unmolested, 8/10   1996 nissan 240sx se ! Now i could go on and tell tales of the first time i laid eyes on the benevolent 240, or the feeling of the first time i went over a very large speed bump in a dropped 240 with coilovers... but thats all in a blog on my facebook page. No this page is dedicated to my one and only first love.... uh i mean my second love......sorry honey .   UPDATE 9/20/09 RECIEVED "NEW" OEM STEERING WHEEL OFF A 97' 240SX! Installed it... just have to wait to put pics up. makes a HUGE difference!***********UPDATE****** 7.4.12Massive updates and installs over the past yearIncluding:D2 coiloversAPEXi dual canister exhaust (knock off)Energy suspension polyurethane bushingsNew (used) 17x7 rimsCooper tiresNRG carbon fibre shift knobNew oem manual trans shift console with bootClear corner bumper lensesCalifornia plates!!!!!!! With license plate relocater (off to the side)WILL GET PICTURES WHEN I GAIN ACCESS TO A COMPUTER. MY IPHONE DOESN'T WORK VERY WELL WITH THIS WEBSITE. BUT I HAVE TONS OF PHOTOS. SHES REALLY COMING ALONG COMING UP: subframe bushings installedTinted windows.300zx brake upgradeEventually a manual trans swapPlus MANY MORE  JUST THE BASICS

EXTERIOR, 360 degrees!

**Notice** the custom leather job on the steering. courteous of the hot hot texas heat    UPDATE 9/20/09 RECIEVED "NEW" OEM STEERING WHEEL OFF A 97' 240SX! CAN'T WAIT TO INSTALL IT

The sub box is ported, facing the other way. obviously. the plexi glass that used to cover the subs started to come loose, the screws actually started to come out. and the plexi glass started making an irritating rattling noise. so it had to go. naturally, removing the plexi glass destroyed the acoustics of the box, so i turned the ported side towards the fuel tank, stuffed a towel in the ports to clog them up and it seems to have done the trick. ghetto, i know. but i'm not trying to win any shows right now. eventually i would love to have a custom set up done. If i'm gonna take up the trunk space, i migt as well take up ALL the trunk space!

--------------------------------------------------***9/28/10REMOVED!Removed Heat shields along the exhaust piping because they were loose and were making a terrible noise when i would let off the throttle. Case in point, noise gone!

Notice the uneven shades of light. Also be aware of background composition. In the left photo there is a garbage can and a tarp and some other stuff that makes the photo look like crap. The photo on the right looks clean, perfectly lit, and professional. SO HOW DID I ACCOMPLISH THIS???Easy. What you'll need is;1: Clean, white bed sheet 2: Bungy cords  3: Camera (I used a Nikon Coolpix L100)4: park in the sun, avoid shadows on the car

1996 NISSAN 240SX SE ------------------------------------------------------------------------------------------------------------------- Whats up CarDomain.com ? Whether you stumbled upon my car's profile by accident, or it is because you are an avid fan of the 240, and therefore have good taste , then welcome to my page.What you have before you is an unmolested, 8/10   1996 nissan 240sx se ! Now i could go on and tell tales of the first time i laid eyes on the benevolent 240, or the feeling of the first time i went over a very large speed bump in a dropped 240 with coilovers... but thats all in a blog on my facebook page. No this page is dedicated to my one and only first love.... uh i mean my second love......sorry honey .   UPDATE 9/20/09 RECIEVED "NEW" OEM STEERING WHEEL OFF A 97' 240SX! Installed it... just have to wait to put pics up. makes a HUGE difference!***********UPDATE****** 7.4.12Massive updates and installs over the past yearIncluding:D2 coiloversAPEXi dual canister exhaust (knock off)Energy suspension polyurethane bushingsNew (used) 17x7 rimsCooper tiresNRG carbon fibre shift knobNew oem manual trans shift console with bootClear corner bumper lensesCalifornia plates!!!!!!! With license plate relocater (off to the side)WILL GET PICTURES WHEN I GAIN ACCESS TO A COMPUTER. MY IPHONE DOESN'T WORK VERY WELL WITH THIS WEBSITE. BUT I HAVE TONS OF PHOTOS. SHES REALLY COMING ALONG COMING UP: subframe bushings installedTinted windows.300zx brake upgradeEventually a manual trans swapPlus MANY MORE  JUST THE BASICS

removed the heat shields outlined in red. there's 3 of them and are easily removed without having to remove the exhaust. just spray them down w/ some wd-40 or pb blaster and those rusty bolts should come right off. ---------------------------------------------------***9/28/10MODIFICATIONSHomemade:SHORT RAM AIR INTAKE  The next few pictures show what my friend and i did to the stock airbox to turn it into a cheap excuse of a short ram air intake.    Before                    After

What this does, is create a nice even level of light inside the car. It eliminates sun glare and makes everything look smoother and clean. It also creates a "white void" outside the windows giving it a clean, professional look. Direct sunlight tends to accentuate dust and dirt and over exposes the photo.

removed the heat shields outlined in red. there's 3 of them and are easily removed without having to remove the exhaust. just spray them down w/ some wd-40 or pb blaster and those rusty bolts should come right off. ---------------------------------------------------***9/28/10MODIFICATIONSHomemade:SHORT RAM AIR INTAKE  The next few pictures show what my friend and i did to the stock airbox to turn it into a cheap excuse of a short ram air intake.    Before                    After

HOW TOTake professional photos Tired of over-exposed photos? Is the sun's glare ruining all your Pics? Here is a quick and easy fix that will give you professional looking photos that look like they belong in a magazine.   Before                   After

BEFORE                                                                      AFTER