SITE OVERVIEW
---------------------------------------------------------------------------------
Page 1 - Exterior Shots
Page 2 - Interior Shots
Page 3 - 3M Clear Bra - Invinca-Shield Installation
Page 4 - Bose Deck rattle fix
Page 5 - Chrome Gauge Rings Install
Page 6 - Sunroof windnoise fix
Page 7 - PIAA H3 Super Plasma Fog & Polarg M-4 Clearance Install
Page 8 - Detailing Gear and Fluids
Page 9 - Umnitza DDE Lightning Angel Eyes
Page 10 - Redline MT-90 Manual Tranny Fluid Swap
Page 11 - 1997 Maxima SE
---------------------------------------------------------------------------------
Installed PIAA H3 Super Plasma Fog lights on 12-27-03.
I'm really happy with the results. An excellent match with the factory HIDS in my opinion. The install process is pretty simple:
1. Jack up car or put car on ramps for easy access.
2. Remove screw, bolt, and plastic pop tab from plastic guard underneath the foglight.
3. Unplug wiring harness.
4. Remove 2 bolts from the back of the foglight housing.
5. Push on the back of the foglight to pop it out.
6. Remove the back of the housing by unscrewing counter-clockwise.
7. Remove screw holding metal pin down.
8. Perform steps in reverse order taking care not to touch the bulb.
The results!
Before:
����������������������������������������������������������������������������������������������������After:
Polarg M-4 Clearance Bulbs:
Before: �� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � After:
