Driveline woes:As may people know, iv been fighting with the takeoff shudder. I was attempting to get a 2-peice shaft put together. The only problem with that is, there $800 . And one of those was for a rebuild!In my talks with Tom Woods about upgrading the stock shaft to include a cv, he mentioned they are offering 100% back if the driveshaft dosnt solve the issues on our Tacoma's. I figured I didnt have anything to lose, especially for $475.I pre-measures my pinion angles and had shims ready to go in. Only issues I had were the bent u-bolts(Above). Everything else went smoothly. Now to the imporant part, the shudder is obviously gone! My vibrations are minimal, and it could get better. I just need to figure out how many degree's worth of axle wrap for cruize load I was off. The slight vibrations are about 44-47 and a short spot around 68-69. The truck is smooth as glass otherwise, and sounds completly diffrent. Makes me wonder how bad that other shaft was flopping around under there...Throwing on a CV driveshaft and not shimming wont fix this problem... for all the idiots out there who b!tch and complain that changing the driveshaft didnt work.