Ok here is my Silvia. It is a work in progress and has been sitting the my garage for 8 months! I am dealing with a broken manifold, PeakBoost has a lifetime warranty so they are going to send me a new one, but since they are built on demand it may take some time. I miss driving it and will update you soon. Let me know what you think!
UPDATE: Just got everything fixed and now it is on the road. Just need to take some new pictures but I am bad about leaving it dirty. Right now I am running 18psi and putting down 420rwhp. Working on getting a standalone to tune it up alittle better but right now it is strong. I will post some pictures this weekend hopefully if I remember.
Just to mention, I broke the manifold again in the same spot it broke last time. Right before the Wastegate. Maybe it is too heavy for that pipe, No Idea. I don't want the car to be down for 3 weeks again so I just had it welded and it seems to be working. If you ever plan on getting a PeakBoost manifold, tell them to reinforce the welds! Rediculous. But it has been proven to give 40hp at the same boost pressure so I am going to keep it for now.
SR20 Red Top out of a S13
Here are the Big Brakes!
Here is a list of upgrades:
Exterior
- Custom paint Nissan Black over Lexus IS300 Silver
- C-West Front and Side Skirts
- Version Select rear bumper
- Silvia "S" and "K" badges
- "X5" 8500K HID's
- Wheels: 18x8 Front, 18x9 Rear AZA Z-09
- Tires: Falken ZE-512
Engine / Mechanical
- SR20DET Redtop 5 Speed
- ARP Head Studs
- Cometic 1.5mm Head Gasket
- Cometic 1mm Manifold Gasket
- New Nissan Water pump and Oil Pump
- Nismo motor mounts
- Lightweight underdrive pulley kit
- Rocker Arm Stoppers
- PeakBoost Top Mount Manifold w/T3 Flange
- PeakBoost 3" Downpipe w/ Cat Delete
- Garrett GT 3071R Ball Bearing Turbo
- Stainless Mesh Intake Filter
- HKS Dragger Exhaust
- Tial Wastegate
- Greddy Front Mount Intercooler
- Greddy Type-S BOV
- Koyo Aluminum Radiator
- Heavy throttle thermostat
- Perma cool 14" electric fan
- Spec Stage 3 six-puck clutch
- Spec 254mm Lightweight Flywheel
- Nismo Mechanical LSD 2-way
Brakes & Suspension
- StopTech Big Brake Kit with Slotted Rotors
- StopTech Brake Pads Front
- Hawk Racing Brake Pads Rear
- Steel Braided Brake Lines
- New 300ZX Master Cylinder
- Tein Type Flex 16 Way Adjustable Suspension
- Tein Pillow Ball Mounts Front & Rear
- JIC Strut Tower Bar
- JIC Rear Adjustable Camber arms
- JIC Rear Adjustable Toe arms
Fuel
- Walbro 255lph Fuel Pump
- Sard 550cc Injectors
Interior & Electronics
- Factory Interior for the most part for now
- Skunk 2 Billet Shift Knob
- Hornet Security System with GPS locating
- Optima Red Top Deep Cycle Battery Relocated to Trunk
- Autographed Driver Side Sun Visor by:
Calvin Wan, Hubert Young, Rhys Millen, Samuel Hubinnette
Vaugn Gittin JR, Hulk Hogan
- Pillar mounted Boost and Coolant Gauges
- HKS SLD Type I (Speed Limiter Defencer) - Sky is the Limit!
- Apexi SAFCII
- Greddy Electronic Boost Controller
- Sony CD Head Unit with iPod
- Polk Audio Component Speakers
Update - 12/4/08 Just some Pictures on a Rainy Day...Great Drifting Weather without messing up my tires...LOL!
I hit the puddle from hell! Now I have to get a new front bumper. Any Suggestions?
Not the same day as the pictures above by the way!
5/4/09 - Finally got my Version Select front Bumper in to get this thing back in shape, the company had problems getting it from Japan and it took 2 Months!! I fitted it this weekend and mounted the brackets and will send it off to paint some time next week. I will try to put up some pictures of the bumper when I got it in and an unpainted test fit. Enjoy!
Also for those that keep asking...I am running 19.6 PSI, that is how I am making the power on the wheels, it does however need to be retuned since I have been messing with the fuel system, as soon as I get the new Dyno Charts I will post them ASAP.
5/8/09 - I took these pictures with my phone sorry for the bad quality, this is the day I got the bumper, still in primer and this was the test fitment, still waiting on my paint guy to have a free moment to paint the thing!? I have already waited 2 months for this thing so I think I can survive for a few more weeks!
Updated Picture on the Motor and Close up of the Big Brake Kit
Tein Suspension and a View on the Intake and Greddy BOV
Here is a view of the front of the car after I finish the fitment of the new bumper. I am
so ready to send it out to paint!
Here is a picture of the signed sun visor.
From Right to Left: Hulk Hogan "Rock Out", Vaugn Gittin JR., Samuel Hubinette, Hubert Young,
Calvin Wan (Falcon), and Rhys Millen
THANK YOU All For Your Support I Hope to Keep Your Attention with Some Updates Soon! Keep Voting!
Much More to Come.....STAY TUNED!!!
