You are on page 1
Page 2 is progress up untill 2-19-09
My car is a 91 Isuzu Impulse RS. All Wheel Drive and Turbo from the factory. I bought it for $1500. Along with it came an entire spare drivetrain, suspension, engine, turbo, doors, front bumpercover, hood, rearhatch, headlights, all kinds of sensors, and a whole lot more.
Thank you for checking it out and let me know what you think.
I redid the front lip again too. It needs trimming and smoothing out.
I also started on building my widebody fender and quarter flares.
-----------------------------------------------
Picture I moddified in paint
I have finished my exhaust with 3" all teh way back. Pics later
The turbo setup has been redone. I made a wastegate adapter to go between the turbo and other adapter plate made by Crambury.
I have been working on fender moulds to make fiberglass fenders for other Impulse owners.
Hoods are next on the list along with rear hatch and doors.
Front lips, sideskirts and rear lip/diffusers are $320 each shipped in US and $350 shipped in Canada
2 front fenders are $450 shipped in US and $480 shipped to Canada
set of quarters are $500 in US and $520 in Canada
set of rockers is $350 shipped in US and $380 to Canada
I take paypal message me if you want any
Pics of My front lip i'm building. the hole in the center is for air flow to the radiator, and I will also add a splitter. Along with fender flares.
Old front lip. below
My RS and my dads Stealth SOHC turbo
-----------------------------------------------
I have taken out the rear seat, rear lower interior panels, and rear trunk panels. I made a custom 10" sub box and sometime soon custom interior panels. The box is mostly 1/2 mdf, and the rest will be fiberglass.
I have been working on the taillights, customizing them. pics later
pics of my old front lip
-----------------------------------------------------
19-09:I started on bodywork yesterday, and today I started on building my bottom lip for the front bumper. I have a few pics of progress.
I ordered adjustable coilovers and a red coolant catch can and other stuff.
progress of bottom lip.
List of current Mods:
...front mount intercooler
...battery relocation kit
...cold air intake
...AEM wideband O2 sensor
...Autometer boostgauge
...3 pod a-pillar gauge pod
...removed egr
...2.5 -3" downpipe
...3" exhaust
...3"straight through muffler
...aluminum racing radiator
...T3/T4 turbocharger upgrade
...Adapter plate to bolt t3/t4 to stock manifold
...ported exhaust manifold
...port matched 1.8l manifold
...ported and polished head
...60mm throttlebody
...coolant catch can
Future mods:
...forged pistons
...Aeromotive Fuel Pressure Regulator
...bigger cams and stronger valve springs
...stronger clutch
...arp head studs
...msd coilpack
...fuel cut eliminator
...lightweith flywheel
...AEM fuel ignition controller
...adjustable cam gears
...Electronic exhaust dump
...bigger injectors
---------------------------------------------------------
You are on page 1
Page 2 is progress up untill 2-19-09
