Here is my 2007 Mustang GT that, my dad and I built. We named it Venom
Custom made hood scoop
Custom made window scoops
Custom made side scoops which are functional
Custom made rear bumper, we cut off the joining area of Cerivis valance, heated and reshaped it to mold it in & used a rubber repair kit to smooth it out.
Custom made trunk lid and quarter spoilers.
All the parts were hand made by my dad and myself.
20X8.5 front 20X10 rims :)
I also got a cervinis front bumper and made custom lower grille
Bought the cervinis side exhaust & skirting....................
Everyone who rates my ride and leaves a guest comment, I will do the same for you. Thank you.
now for pictures
Shorty antenna
F4 Challenge- Hand made Custom lower fabricated honeycomb Grille to match the upper factory grille.
My 2007 license plate My 2008 License plate
My license plates for 2009, still my ride I just got new plates every year.
The DVD Video Player also has GPS navigation built into it.
F4 Challenge- Hand made fiberglass fabricated side Windows louvers.
We removed the factory 1/4 glass that sat on the outside of the 1/4 panels and had new glass cut to fit the inside of the 1/4. This way if the glass ever gets broken, it can be easily replaced, without removing the molded in window louvers. The louvers are tilted so no water stays inside or sits on the glass.
F4 Challenge- Molded in Cevinis lower bumper skirting
The Cevinis side exhaust comes with a rear lower valance to cover the GT's rear exhaust. We didn't like the way it looked with a big ugly line going under the side marker light. Cevinis supplied double sided tape to stick in on. So we customized it fit, by cutting it, heating and re-shaping it to fit. We used rubber weld & repair kits to give it this clean line fit.
Magnaflow Side Exhaust getting installed at home.
F4 Challenge- Hand made fiberglass fabricated side scoops, which we made functional with holes going all the way through.
We designed & made our own molds of both the side scoops and window louvers. We also have ducting inside the side scoop. It tunnels the air out into the inside wheel opening. A shot of the old 17" wheels and the new 20" wheels. 20 X 8.5 front and 20X10.
F4 Challenge- Hand made Fiberglass fabricated left & right Quarter panel Spoilers all molded in.
F4 Challenge- Hand made Fiberglass fabricated trunk lid molded in spoiler
We designed and made molds for the trunk lid and quarter panel extensions.
F4 Challenge- Fiberglass fabricated hood with inner air channels
We also designed this hood and made a mold of it. There is channeling going through the inside of the hood.
Little details like drain holes on the rear of the hood scoop louvers and window washers nozzels were fitted to the hood. You can see by the shine where the stripes are all cleared and there is no ridges in the paint.
F4 Challenge- Custom made 3rd brake light
F4 Challenge- Customized headrest
We had custom Venom decals made, including the side stripes & added some custom Venom headrests. The Flash picks the headrest up a white, but it's silver with a grey outline, same color as the car.
My Uncle bought me the Cobra Snakes license plate frame to go with my Venom theme.
Downtown Vancouver in the back ground.
Cruise around Stanley Park
Under the hood we added hood struts, Venom strut bar and had all the rad covers and extentions painted. Then added the airbrushing.
Jim Hall did this airbrush work on my rad cover and extensions. Click on them to get a closeup of the detail in this airbrush work.
Airbrush work by Jim Hall. Won the Online Car Show as Peoples Choice for my ride on Dec 31st 2008
Added A Cold Air Intake & Shock tower Caps. Photo through the hood.
Next we added Polished Value covers and throttle body parts.
We removed the black strut bar and we add a matching color Strut bar with Venom paint in the same color as the Stripes. I'll update the other under hood photos soon.
Under the hood with all the parts installed.
Left & Right shots under the hood.
My sister taking some photos of me passing her, she is driving the black Mustang Convert as you can see by the molded in quarter spoiler.
Some shots just after a car show, day wasn't that nice, but I love car shows.
Cobra Airbrush work done by Jim Hall.
F4 Challenge- custom stripes 3/4" center, 1/4", 1/4", 10" 1/4", 1/4" on each side, then all clear coated for smooth finish. Plus the Left & right side Venom stripes.
New value stem covers, Thanks Sis.
No more boring blink. Added sequential Taillights. The sequential works with Blinkers, Flashers and Brake lights. Blinker & flasher off.
Turn signal starts to blink on the inner bulb, flasher both inners
Blinker 2nd bulb lights up. Four way flasher 2nd bulbs light up
Blinkers 3rd bulb lights up. Four way flasher 3rd bulbs light up
Off, Then and it starts all over again. It blinks as fast as you can say, blink, blink, blink.
Chip Foose & his wife Lynne both signed the photo of my ride. We're buddies now, I call him Chip & he calls me Troy-CoolStang!! (lol)
My Mom's Black convert and my Silver coupe at the June 2009 Mustang car show. Sorry mom, but the award was for my ride.
Make sure you leave a comment so I can vote for your ride.
Please Scroll back up & rate . I response to all my guest comments and thank you for visiting my page.........Troy
Posted by: kittedinfinit
07/05/2009, 08:14pm
SIck!