PG1
PG.1 Pictures 
PG.2 Videos
Here is the Page for my Project x3 1998 Hyundai accent.
Pulled auto trans out and getting ready for 
swap to manual
FMIC
T25 tubocharger
Another pic of the front mount
Interior Totally gutted
Blow off valve and upper charge pipe
Adjustable FPR
cleaning up the nasty flywheel
Flywheel nice and pretty and mounted
Stage 1 Clutch kit installed
Custom downpipe... This was difficult to make because of awkward angles and im gonna need some heat sheild for the alt wires. I actually ended up relocating the alternator to the back of block and got tons of room
Some pics of the finished downpipe.
Oil Feed Line installed
New brake pedal and old
Holes cut for clutch master and pedal
Clutch master cylinder installed
Pedals installed
Getting there... Trans in.
Pic with FMIC
Cleaned up Spec stage II clutch awaiting need for install
Fresh painted black interior parts Ford racing 310cc injectors
Some turbo rebuild pics
Painted the compressor housing Blue and painted turbine housing and manifold and downpipe with 2000 degree paint
Just a pic of motor with turbo set-up out
My Manifold, turbocharger and downpipe set-up all nice and clean. For now!!! I cleaned everything, painted, and washed my hands everytime i touched something again
Turbo back in with new 3an feed lne, new fittings and drain line
My Accent and my best friends tiburon on top of a parking garage.
Make sure you make your return line simple and large. Will save you so much headache
Changed my loom from red to blue
New color for my valve cover
Valve cover back in
Just a close up of my little friend. finish is holding up nicely
Polished out the IAC valve
New look getting there Heat shield back on
Also did the tabs for the radiator supports
