HOW TO GET 22"S ON THE NEW BODY IMPALA
THIS IS ALL REAR END WORK, NO MODS WERE NEEDED UP FRONT AND I CAN STILL DO A FULL U TURN!
THIS IS HOW YOU STOP FENDER RUB. YOU WANT TO PUT 1 STRUT STIFFENER ON EACH SIDE. THIS WILL MAKE THEM LAST ALOT LONGER AND GIVE YOU A BETTER SMOOTHER RIDE.
NEXT YOU WANT TO GET A SET OF WHEEL SPACER'S. THIS WILL STICK YOUR WHEEL OUT SO IF YOU HIT A BUMP IT WONT HIT THE STRUT. PENDING YOU MIGHT HAVE TO BEND THE STRUT PLATE BACK SOME.
IF YOU STILL RUN IN TO RUBING IT MAY BE YOUR TIRE HITTING THE FENDER. SO TO STOP THIS YOU WILL NEED TO GET A SMALLER TIRE SIZE OR "ROLL" YOUR FENDER. YOU JUST HIT THE BACK SIDE OF IT WITH A RUBBER MALLET. START OFF BY HITING ONLY THE VERY TIP PF THE INSIDE FENDER THIS WILL GIVE YOU A SMOOTER LOOK AND MORE CONTROL OF HOW MUCH YOU NEED TO DO.
I HOPE I HAVE HELPED YOU GET THE INFO YOU NEED AND GOOD LUCK.
