Well here is the turbo conversion.....
Here i got the car sitting on the air so i can work from the bottom
Here i got the manifold kinda off...Here its off man it was tuff.
haha its waiting finally on damn that was tuff 2!
Took off the air intake for the intercooler
I just got the fuel rail off. got the injectors completley off and is ready for the 7MGE Denso injectors
I removed the ash tray an the plastic around the stereo, then i disconnected the 2 connectors one is for the pump and the other is for the fuel level.
Im removing the heat shields (so i can loosen the fuel hose as u can see on the 2nd image)so i can remove the fuel tank to change the fuel pump.
well now im under the car dropping the fuel tank to get to the fuel pump which is located on the top of the tank but first i had to remove the bottom shields to get to the tank. And if doing this "Drain Your Gas before dropping the tank."
To Drop it for anyone doing the same this u have to get those scews that i marked in red.To see them better enlarge the pic
You can see where the gas tank is finally got it off man its a B I if your doing go here it gives step by step instructions http://www.lovehorsepower.com/MR2_Docs/mr2_fuel_pump_removal.htm
Its on the floor and ready for fuel pump change.
My new Walbro fuel pump ready for installation
Got my 315 Denso injectors on completely ready to run =)
Alright I'm Almost there
Putting on my boost gauge and my Oil temp gauge
Got them on and working..
