This is my girlfriends 2007 Toyota Camry. It has a body kit, E&G top and bottom grill, 22" Gio wheels, 7" In dash Sony tv, 10" center console swivel tv with built in dvd, 2 12" Pioneer Premier 3000 watt subs, 1 2000 watt amp, leather interior and sunroof installed by C&C Top Shop in Fayetteville NC.
Now when i went to install these 22" wheels i asked alot of people on here with them on there Camry's questions and only had one person responded! He was very helpful but the setup he is using didnt work on this model! This Camry is an 07 with the 4 cylinder engine in it! Anyway I ended up running a 22X7.5 wheel with a +40 offset! I used a 235/30/22 Nitto Neo Gen tire. When i mounted the wheels and tires, I had to deflate the air out of them to get them on the hub! If not the tires hit the kit and it would not go onto the studs! I also had to run a 1/2" spacer and E/T lugnuts! After putting the wheel and tire on to the studs, inflate it back up with air and let it down and should be fine! NOT THE CASE! Then i found out it rubbed like hell on the body! Add spring booster clamps from Advance Auto and this will take care of that! No Scrub No Rub! Also had to trim the kit a little bit but nothing to major! So hopefully by typing all this time i have made a difference to someone that is going to try this task by putting 22" wheels on a car made for a FUCKING TWENTY INCH RIM!!! HAHA
This was the first set of wheels we put on it! 20x7.5 Maas wheels with 225/35/20 Nitto NT555 in the front with 20x9.5 Maas wheels with 255/35/20 Nitto NT555 in the rear!
