2- 10" Fusion PowerPlant mounted in a small sealed enclosure. The bottom of the enclosure was fiberglassed in order to fit the shape of the wheel well. The subs are DVC 4ohm, wired to 2ohm loads. We covered the box in black leather. The red panel with our logo was wrapped in clear vinyl to keep it protected. The red panel is easily removable to gain acces to fuses and our gold top battery.


White keyholes on the brake lights, to match our shop vans
The floor panel closes over the subs so you cant tell they are there. The system was designed to sound better with the panel closed.
Streetglow LED's illuminate the subs and logo panel
JVC double-din in dash.
JVC DVD stereo and Fusion EQ/LineDriver/Crossover mounted under pop-up panel on top of dash.
Hidden under pop-up panel on top of dash, highlighted with Streetglow LED's
We mounted the 2 amps on the side walls in the rear.
The amps on the side walls illumimated with red Streetglow LED's
The 3rd brake light lights up with JENSENS and surrounded by "keyholes". We also mounted some leds in the 3rd brake light that give a soft glow when the parking lights are on. So that at night you can see JENSENS even when the brakes are not on.
We mounted a camera above the rear license plate.
We removed the Chevy logos, took them apart and repainted them red from the back side of the clear logo.
We had our company logo put on the sides with white reflective vinyl. We removed the side rocker panels and had them painted white to match our shop vans.
We removed the Chevy logo on the rear and removed the gold paint from the backside and repainted it red. We also installed LED's behind the logo that light up with the parking lights.
We ordered chrome door handles and the rear beauty bar in chrome from the dealer. We plan on getting a chrome grille and adding either 17" or 18" chrome rims in the near future.
At a car show