1979 OLDSMOBILE CUTLASS SUPREME........

Oldsmobile 350 rocket engine, B&M shift kit, 350 turbo trans. edebrock carb, and sittin on 24's. I wish i still had the car but i sold it....(Thanks Craigsilst) but anyways, the rims are GIO 942's . 24x8.5 with 255/30/r24 pirelli pzero nero tires. 5 lug. To make them fit i used 1/4 inch wheel spacers in the back and in the front i put on two of those "knuckle" spacers inbetween each spring and that gave it maybe an inch of lift. and cost like $30 total. Also i had to do some scraping of the rear wheel-well with a grinder, the inside of the wheel-well is not big enough to handle the bumps in the road...it will scrape unless you have a lift or air suspension(which this one did)in the back. In the front i had to scrape just a very very very little bit on the front wheelwell for the wheels to clear it on turns. It was a very tight fit. These rims barely fit on, but it drove like a dream on the highway and the 'hood.... as you can see... they are tucked in there nice and it looks cool but the turning radius was horrible. So there you go.... if you have any questions just ask in the geustbook.

Have a nice day!