work in progress
Disk brakes
3 blade deck
electronic ignition
hydraulic ram that moves the deck up and down
17HP engine driving a hydrostatic trans, With a drive shaft?!
What more do you need to mow the lawns in style!
Pictures of these items will come at the end of the day ta ta for now got to go to school!

before

after... 1/2

List of things I have done already
carb rebuild
new braker and condenser
new spark plugs
new starter
new lights
mower deck pins refabe
new fuel pump
changed oil due to fuel pump leaked into block
unfroze the hydraulic ram that moves the deck up and down
rewired the electric clutch for the mower
cleaned and tightened the rear disk brakes

needs more paint and the Bolens stickers off of the bolens web sight and of course the brake lights are broken

Pore Bolens got stuck in yard yesterday because I tried to cross a small brook with it, the mower deck cot a rock and held it there, so i placed a jack under the rear and took the deck off and what do you know backed right out of there with no problems, then i stuck the deck on and continued mowing, I also decided to take the old gas from the snowmobile and stick what wasent rusty water into the bolens, now the good thing is the gas still burns and there was 5galens of it but some had 2cycle oil in it so the tractor smells like old gas and a old 2cycle snowmobile and smokes like one, XD I also fixed the carb so that i can now get higher rpms instead of putting around, aperintly the one who had it last thought it would be better to bend the govener arm down so it wouldn't do much