Autodynamics 69 Charger

Ever since I was in forth grade I wanted a "general lee" well after thirty years later I got that wish. When I first got it I was going to turn it into a general lee but then I changed my mind. I really wanted to build a modern day fuel injected 69 charger that would be turn key, handling braking monster.

The car started off a a green 318 small block with a white vinyl top and white interior. I bought the car online sight unseen from Florida. I had It shipped to NY and started to figure out on how to make a modern muscle machine. I knew I didn't want drum brakes and the handling of an old car. . Nothing really was available from allot of vendors. Baer brakes didn't have a B-body application but after a ton of research I figured how to make it happen. A LOT of the purchasing was done through a ton of research to actually see what worked on the car and what didn't. Few people were able to help me. Others steered me into the wrong direction.

As I was deciding what motor/trans/ wheels to go with i sent the car to the body shop where Keith and his brother Steve did all the body work. K&M AUTOKRAFT massaged the body and labored 400 hours into the once rust free original panel car. I had them shave the rain gutters fill in all side marker openings all factory seams and antenna hole. I had all the gaps welded and panels spaced evenly. I choose ford gt-40 Blue for color. A ghost stripe was also added on the tail for that extra touch. Once back from body I bought a set of corbeau gtIII seats and had them recovered to match the factory pattern in white and the rears followed. I had all the plastic, chrome and headliner redone. All the interior and i mean everything was redone. Windows switches screws bulbs etc.etc.etc. Nothing was left undone. I dynamated the entire interior before i installed the original gauge cluster that redline gauge works redid for me. They converted my amp gauge to a volt gauge and installed a tach in place of the old clock. They also refinished my gauges in white with orange needles.After the interior was completed carpet headliner, seatbelts,plastic,chrome,handles, glass.......and on and on...... Soon after i had the suspension done by Al's performance in Lindenhurst New York They installed the bear brakes front and rear, hotchkis sway bars, tubular upper controls hydroboost from hydratech. All new bushings and shocks were installed. I had them powder coat the entire suspension,k member, and anything that needed durability.

Once that was all done I put on the Budnik 18x10 and 18x8 fontana's mounted. i had Budnik drill out ball rivets to give the wheel a 2 piece look. Once the suspension and wheels went on the car I drove it for a month before tearing it all down once again. This time it was major surgery motor trans and rear all came out. A new 6.1 Hemi crate motor was installed backed by a keisler automatic 4 speed. Out back 3.91 went in. A true trac sure grip was built by Dr Diff. With the 3.06 first gear on the trans the combo was perfect. I had a custom gas tank made from Ricks Hot Rod Shop in Texas. Ron Davis supplied us with a aluminum radiator with electric fans mounted and ready to go.Psc Power steering Specialties helped us sort out some power steering issues. After the motor and trans went in the exhaust and electronics was next. TTi supplied the headers and full exhaust. The pcm was flashed by B&G and the wiring harness was supplied by Tony Squire. Once that was all done the car began coming together. There was allot of attention to detail throughout the entire car. Pictures cannot represent all the talent that went into getting this plain old 69 charger into a modern day pro touring machine! From the body work to the wheels to the lights...every part of the car was carefully massaged and gone over paying close attention not to loose its originality.

A lot of tweaking and man hours went into this ride. Currently the car has about 500hp gets about 16-20 mpg on the Highway. The car is enjoyable and not fatiguing even after a 3 hour drive. Its a sure pleasure to drive.

The car is named OVRCHRDG

www.auto-dynamics.com

ENGINE:

6.1 Hemi crate(new)
Keisler auto/od trans
Doctor Diff 8 3/4 sure grip rear 3:73 gears
ricks hot rod shop gas tank
Ron Davis radiator
custom engine harness
custom factory pcm from B&G
TTI headers/ full exhaust
Charlie's oil pans
TTI motor mounts

SUSPENSION:

Firm Feel tubular upper control arms
Hotckis sway bars 1 3/8"
Mopar .960 torsion bars
Hydro-boost brake assist
Edelbrock shocks
Baer brakes fronts and rear
Eaton rear leaf springs
Pst front end bushing Kit

BODY: by K&M AUTOKRAFT

400 hours blocking in body
Shaved rain gutters
Seams welded for close tolerances
Emblems removed
Side markers shaved and smoothed
Ghost stripe in rear of car
Custom true hid xenons
New seals throughout
Hours and hours of blocking and sanding

Interior:
Corbeau GTS II seats recovered in "factory pattern " in leather
New carpet
New headliner
Original 69 door panels dyed
Budnik steering wheel
XV Motorsports seat belts
Custom AM/FM factory radio with i-pod
JL Audio 500/5 amp
Morel speakers
Reworked gauges from redline gauges (white face)
Factory shifter to work auto from keisler
Power windows from Electric Life
Power door locks
Power trunk
Dynamat entire vehicle/ sound deadener
Paddle Shifter by TwistMachine

WHEElS:

Budnik 18x10 rear 285/40/18
Budnik 18x8 front 245/45/18
Nitto tires

After sometime i have worked out some minor issues. What pictures can't show is the way the entire car works in harmony.Everything works no squeaks or rattles just sheer power and drive ability. Its the small stuff that pulls a car together making it a true modern day muscle machine. I will post some pictures from the shows that i will attend and the comments i receive. Thanks for viewing my car and rating it....Pete Autodynamics of New York visit us at Auto-Dynamics.com

Special thanks must be given to:
K&M Autocraft 631-243-2608
Al's Performance 631-842-7734
Keisler transmissions 865-609-8187
Redline Gauge Works 661-259-8891
Budnik Wheels 714-892-1932
DR. Diff 406-883-4772
Firm Feel 800-347-6426
Hydratech 586-427-6970
Twist Machine 631-610-4186
and many many more.....

here is the car a few weeks after completion

real aggressive wheels and tire combo
Paddle shifter By Twist Machine
Paddle shifter installed perfect combo for the car

hid conversion headlights
6.1 hemi motor at XV MOTORSPORTS event
Ghost stripe on the tail

led taillight conversion

Corbaeu seats that were redone in the factory pattern but with whole lot more support and comfort

Here is a side view of the body there has been over 400 hours of labor to get the body to this shape. No body panels were replaced the car sill wears all of its original body panels nothing was replaced

all the plastic was redone Note: There is NOTHING on the car that has not either been restored or replaced

this is how the car started off about 2 years ago the build took about one year to complete start to finish

here the original dash was restored and altered. the original amp gauge is gone and now in place of it is a volt gauge to match the look .The same was done with the tach
l>
here is a closer pic of the ghost stripe.....
here is a shot in paint look at the body......its real slick and lines are perfect much better than in 69

old motor....had no power.....
motor is in here...waiting for more parts