Removing the Center console
remove the ashtray and press/push the small plastic lock
using a plat screw driver, push down the clip in between the space then slide a little to make way for the open gap. the clip is in line with the vent's center position.
here's the clip location that is needed to be push down by the screw driver
remove slowly the center console, there are small clips at the side also :)
My circuit breaker instead of a fuse block located near the battery
The AMP wire is inserted at the spare hole of the original ruber wiring going inside the vehicle.
Fuse block distributor located under the 3rd Row Seat together with the 2 amps
my Diy Setup with a 4farad Capacitor at the right
