300c Srt-8 built by Chris Wilcox a his DrTurbo workshop
Here's the module; which uses voltage input to control nitrous and gasoline
We used the original intake to decide on positioning and wiring; while we made the custom intake
Bottle installed in trunk
Srt-8 power!
Custom DrTurbo 90mm mandrel-bent #304 cold-air intake to house the ZEX single-fogger nitrous
ZEX electronic module unit mounted to firewall
Another photo of intake with locating-support to hold it firmly in place
Overall view, with braided lines running along fuel rail. We took the feel-feed from the pressure line on the passenger-side of car, then ran it across to the ZEX module.
Close-up of fogger and relocated IAT (inlet air temperature)sensor.
In the beginning, we ran 75hp jets and checked mixtures with a wideband. The client is very power-hungry so we slowly took the jetting up to 150hp while keeping a close eye on the mixtures.
