Please Rate My Ride

3/2/09 Thank you for making me the number #2 rated G35!!.

This is my 2004 Infiniti G35 Twilight Blue 5AT Twin Turbo. My plan was to just make it a little faster than stock but to keep it as sleeper looking as possible. Started this little project back in 2004 with a Vortech supercharger but needed more power and torque, unfortunately in 2006 I got carried away and ended up where I am today I am still adding a few items but the majority of the work is done. I will add more videos when available and hopefully some high speed runs.

I will be sending the car in for some more work in June/July 09, hopefully this will get me close to 550rwhp on 91 octane, plus I will be tuning for a second map at 16psi ;-) following items which I am working on getting done are;

GTM stage 2 cams
11.00 mm Peak Lift
232 deg. Dur. at 0.050" lift
272 deg. Adv. Dur.

New 06 lower plenum from Nissan with the shorter runners.

Having the rims powder coated black like this;

The Greddy sideskirts sitting here in the garage and a CS bumper from Klumzyee.

Lastly I will install my Works Bell paddle shifter which I have had for months.

UPDATE 5/17/09:  I just put my Project Kic 10mm spacers on the rears along with a fender roll but still need a 1/2 inch drop. I also installed a 10 piece grounding wire kit.

 

 

UPDATE 3/29/09: Last weeks meet.

 

UPDATE 3/25/09: Debadged the car to make it look cleaner.

 

UPDATE 3/21/09: Pics from last weeks meet.

 

UPDATE 3/11/09: A video of when I was supercharged.

http://www.3si.org/forum/redirect-to/?redirect=http%3A%2F%2Fvideos.streetfire.net%2FPlayer.aspx%3Ffileid%3D416EF89A-4DD8-4DCB-BCE4-CBE9E64FE162

UPDATE 3/1/09: Some pictures I took after installing my new fog lights and the new better radiator cap.

 

 

UPDATE 2/4/09: Just picked up a knick knack item.

Some Kics 10mm spacers for the front and rear with built in studs.

           

UPDATE 1/9/09: Well as I have an upgraded auto transmission I might as well add a paddle shifter kit.

Will be installing this in the next few weeks, will post more pics of actual install.

 

 

UPDATE 11/30/08: Some vids I had saved, one of the dyno and another from a meet.

http://s140.photobucket.com/flash/player.swf?file=http://vid140.photobucket.com/albums/r34/GT-Motorsports/ACG35/NVEExport.flv"></embed>

 

http://s40.photobucket.com/albums/v406/baj123/?action=view&current=short1-2.flv

 

 

UPDATE 10/27/08: Pic of engine bay with a more stock looking setup;

CARB legal intake and anodized pipes. What no BOV :)

     

UPDATE 9/16/08: Pic of EDFC in concealed location;

UPDATE 9/12/08: Some sunset shots;

               

UPDATE 8/20/08

New numbers 520rwhp @ 16psi 100 octane, that's 614bhp!!!!

UPDATE 6/16/08: Kuruma Z front pic;

UPDATE 6/6/08: Photoshoot pics;

 

UPDATE 6/5/08: New front Kuruma Z bumper arrives;

 

 

UPDATE 4/6/08 : Roof Spoiler added;

 

 

UPDATE 4/5/08: Pics from the meet this weekend;

UPDATE 3/8/08: Pics from HIN this weekend;

 

UPDATE 2/26/2008: Bought some new items: SPC rear camber and toe bolt, GT Spec Rear Lateral Brace bar, Gialle Grill and OEM front lip.....more parts arriving next week.

UPDATE 1/29/2008: New Wilwood BBK 6 piston 14" rotor front brake kit and 4 piston 13" rotor rear brake kit and new front SPC camber kit

 

UPDATE 1/18/2008: New pictures

 

                

 

 

1/5/2008 UPDATE: Dyno numbers are 456rwhp and 510ft trq @14psi.

 

 

  

Here are some pics of the engine build all done at GT Motorsports in LA;

               

 

Engine

Resurfaced cylinder head with an RA finish
New viton valve stem seals
HKS head gasket
Wiseco® Extreme Duty pistons 8.5 compression
Carillo Forged Rods
Mag and micro polishing of the crankshaft
Balancing of the rotating assembly
Rear main seal assembly
GTM® Race bearings (standard bearings)
ARP® 2000 11mm head studs
Resurfacing (decking) of the block
Boring and Honing of the block (with a torque plate)
Crawford Plenum 5/16" Spacer
Deathwerks 660cc Injectors
Walboro 255lb Fuel Pump
APS Twin Turbo System
GTM ECU Reflash
Blitz SBC Boost Controller
Upgraded actuator springs (red)
HKS FCON V Pro
HKS F CON Navigator
Fast Intentions Intimidator exhaust and test pipes
Greddy Catch Can
Stillen Upgraded oil cooler
JDM Right Hand Battery Cover
NRG Hood Shocks

Suspension

GT Spec Rear Lateral Brace bar
Front and Rear Stillen Sway Bars
SPC Front Camber kit
SPC Rear Camber Arms and Toe 
Tein CS Coilovers
Tein EDFC

Transmission

GTM Upgraded Tranny Internals
GTM Upgraded valve body
Edge Racing Upgraded Torque convertor
B&M Upgraded Tranny cooler

Brakes

Wilwood SS brakelines
Wilwood 6 Piston 14" Rotor Front Brake kit
Wilwood 4 Piston 13" Rotor Rear Brake Kit

Wheels/Tires

Project Kic R40 Neochrome lugs
Volk SF Challenge 19x9.5 & 19x10.5
Khumo SPT 245/275

Exterior

Klumzyee Greddy Sideskirts
06 Projector Headlights
Philips Xenon 6000k Ultinon Bulbs
Sony Reverse Camera
KP Technologies Tilt Down Mirror Module
KP Technologies Roll Up Window Module
Kuruma Z Front Bumper
Klumzyee Roof Spoiler

Interior

DVD Player in Glovebox
Beside the Boost Controller and Navigator, completely stock

Fcon Navigator install and boost controller install pic;