24's with a high offset should fit with little mods, lift front strut plate(u need a bottle jack to do this put it in between the strut plate and the rotor, make sure there is a lug nut on the stud so that the rotor doesnt move)jack it up as far as you can get it, take out some plastic in front wheel well(this is the wheel well splash guard cut to suit ur need),do a little metal shaving in the front wheel well the side closest to the the fire wall (grinder works well, u need a cutting disk and a gringing disk), roll rear fenders( i used a hammer and a torch so the paint wouldnt get chipped), and coil spring lifters in front and back(u can buy them at autozone or any automtive store). I only had minimal rub in front then it stopped. I can do three point turns with no problem and thats with 24x 9.5 wide with 275/25/24, with an offset of +35. I had no problems at all. 24x 8.5 should be better with a +25 to +35 offset. They had 24x 8s but the company decide to not make the any more, they would have been perfect no lifting, they have a +35 offset. they where made by Defy D13 Dice
http://superbuytires.com/Defy%20Whee...ze=275%2F25R24
MY NEW WHIP on them 24's. Yes 24's
Forte F9 Lockdown 24x 9.5, 275/25/24 pirelli
MY NEW WHIP
Gio 942's 22 x 7.5 Hankook 245/30/22
Tail shot
Another rim shot
