This 85 has a solid body and is getting the works to start off the ECU is getting pulled and replaced with (SDS) Simple Data Systems stand alone plugs into the exsisting harness. Then a 255Lph fuel pump with 120psi shut off gets installed intank, with 255l and 140psi inline pump. 72 pound per hour or 750cc injectors. VAM removed 3 Bar MAP (30psig)to replace it, air temp sensor wired in, MSD multi spark 6A ignition. Garett hybird turbo T3 stageII wheel .48 A/R turbine side, TO4E 60-1 600hp, internal actuator. Will use a BOV. Then custom Intercooler up front. Rework the intake turn it 120 deg at the base. Some hacksawing, grinding and aluminum welding will do the trick. Then on to the brakes and tires. Should be finished fall of 2008.