This is my 1994 Camaro Z28. It has about 110K miles on it and this is where the story begins. I found this car in a local newspaper for $1100. I went the first night it was in the paper to look at it. It had hit a deer and the front end was crunched a bit, but this guy (who was the original owner) neglected the car for years and let it fall apart. It needed everything you could imagine. Transmission, Intake Gaskets, Tires, Brakes, Doors, Interior (All of it), and all of the parts that make up the front end. I since have also installed high polish Y2K style wheels off of a 2002 Corvette that only had 22K miles on it. The rear wheels since the pics have had 1.25" spacers installed on the rear, a spohn adjustable panhard bar, spohn hollow sway bars, polyurethane bushing kit, solid motor mounts, optima red top battery, and taillight blackouts. Torque arm and Lower Control Arms are soon to be ordered. I am also assembling a separate engine for it. It is another 4 bolt block, bored .030 with Mahle forged pistons, eagle h-beam rods, and an eagle 4340 crank. Will be 11.4ish:1. Stock ported heads (LE1), CC503 cam, crane gold rockers, GMPP guideplates, and hardened PR's. I'm hoping for 375 RWHP N/A and about 450-475 on a 150 shot.
This car is now for sale. I need to pay for the 1998 Trans Am. I am looking to get $7500 OBO out of it. Don't be afraid to make offers. I have a set bottom dollar and I will let you know what it is if you make an offer on it. I am looking for serious inquiries, so no tire kickers.
At this moment it has:
All of the free mods (TB bypass, removal of Donkey Dong, MAF descreen etc.)
Homemade tune (LT1 edit)
Delteq ignition system
Flowmaster 40 series muffler
SLP dual-dual tips
8mm Delteq Wires over the valve covers
AC Delco Rapidfire Platinum Plugs
Car came new with: hardened push rods and roller lifters. The stock cam is plenty for me. It is also rare because the block is a 4-bolt main. All Camaros were supposed to be 2-bolt cars. It is a numbers matching engine.
Page 1 - Intro, finished pics
Page 2 - What I started with, Some paint pics
Page 3 - New Parts I put on it
