Here are a few new pic's now that I'm back from Iraq, finaly!
This is the only pic I have of my old 92 Blazer.
It was totaled :-( I'll be building my Yukon just like it.
I saved as many cool parts as I could like my motor.
I plan on installing the old engine in my Yukon soon.
Here's a pic of my new project it's a 94 GMC Yukon.
Lot's of Mods planned for it. 6" Lift, Tires, motor and lots more. Stay Tuned!
my motor is a 383 cubic inch Stroker. It's Throttle body injected.
Built by my good friend Mike at Custom Engine and Machine in Great Falls, Montana
I have AFR Air Flow Research Aluminium 185 heads, 2.02 intake
and 1.60 exhaust valves, 1.5 roller rockers, hardened pushrods w/guide plates, and ARP bolts.
It's like bolting on 100 extra horse power with these babies!
$1,300 WELL SPENT!
Hyperutectic pisons (10:1) "X" rods
Eagle Crank cast for 383 as opposed to a turned down 400 crank.
Comp Cams Xtreme Energy cam
460 HP 480 ft lbs Tq.
Hauls Ass and Sucks Gas!
MSD 6A Ignition box and 8.5mm red wires
MSD Ignition Coil
I just had my transmission rebuilt with all the cool upgrades.($1,700)It's a 4L60E with 9 clutch packs vs. the 6 stock
Hardened 5 sprag sun gear and planitaries
Corvette servo
Line pressure booster
Shift kit
Deep aluminium pan with temp sensor probe threaded in up to the Auto Meter temp gauge mounted in the tripples on the A-piller
Royal Purple Max ATF fluid
Royal Purple everywhere, diffs, transfer case, engine)
Flowmaster 40 series mufflers
I'm going to go with Rockstar KDC 18" black rims and Maybe Cooper STT 35X12.50R18 tires
Wheel Pros XD 775 Rockstar Black 18x9 Wheels
My last lift kit was a 6" from Pro-Comp but this time I'm going to swap in a solid axle in the front. Dana 60 with hi angle steering and kingpins and some 2 or 3" springs. 4:10 gears
I still have my 6" springs for the rear.
Also a Dana 60 for the rear 4:10 gears. 8 lugs
I have a NP205 gear driven transfer case I plan on swapping in.
I have a Kenwood deck (KDC-589) I plan on moving up to the KDC-X891
I have had Sirius Sattelite radio since 2002. I like it better than the XM in my Cobalt. (Check out my cobalt page please)
06 Cobalt Super Charger Heaven
2 Memphis Amps: 600W mono for the 2 10" Kicker Comp VR Subs.
1 250W for my other 8 kicker speakers. I have the component speakers in the doors.
More to come and more pics too.
These are the Tail lights I want to get and the headlights I just installed
My Buddy Danny is going to repaint the whole truck black again.
He did my 92 and it was awesome, really straight and flawless.
I plan to get a cowl induction hood again and the lighted moon visor as well.
I want to get a Road Armor bumper too one of these days with a winch in the front.
I think I'll put the windshield visor and wiper cowl on this truck too.
Lot's more to come on the Yukon so stay tuned. ;-)
Thanks for checking out what I've got so far.
Bouncin' babes on page two!
