Suspension Upgrades.
Tire.... Toyo T1S 205/50/R17
Rear End
First thing I did to the suspension was clean it.
C-Notch
C-notch done at STS (Sport Truck Specialties)
Belltech Spindles and PowerStop cross drilled rotors
The Rotors are for Hardbody only (they don't have any for 720's) but I was able to install them by using Belltech drop spindles. The spndles are made for hardbodies but are made to fit the 720 by using spacers included with the spindles. Everything else is the same.... from calipers to the hub.
I removed everything and cleaned it off.
The outer tie rods had to be trimmed so I cut off 1" off each of the ends. I went ahead and installed a new upper ball joint.
After installing the new spindles and adjusting the torsions bars I realized the rear needs to go lower and that the wheels hit the fenders when the suspension compresses.
3" angled blocks
I painted the blocks same color as old blocks and calipers, drums and other fittings.
Rear brakes and Drums
Finally replaced the rear brakes and painted the drums to match the front spindles and calipers.
Now they all match
-----------------------------------
Index
1. General info
2. Performance Upgrade
3. Interior & Sound
4. Exterior & Paint
5. Suspension Upgrades
6. Fiberglass Projects
7. KA24E Engine Swap
8. Firewall changes (room for Turbo)
9. Turbo
10. Misc pics (Quads and Truck)
