A few pics of the way my car sits now.

My SRT-4 Rims. I only got 2 for now but its a start. Also notice how much lower my car sits with the lowering kit.

This is were Im putting my other guages I am putting them on a pod here soon so they will face me at an angle. This one is my air/Fuel.

My newer guages water & oil pressure

My 4 point harness witch I feel much safer than the stock seat belts.

I left the alternator up front for a few reasons:
1.easy access I dont have to fight to get to it on the back of the motor it comes off and just a few minutes.
2.Uses a thicker and wider belt much stroger that the 2.0s belt.
3. A bigger alternator.
4. Go without p/s and a/s and you have a realy short belt to work with.
If you do the same make sure you take off the idler pulley even if your runnin p/s and or a/c cause it breaks belts to easily.If you need the belt size I can give the to you just ask I kept the box it came with.I had to do alot of testing on belts to get the right one.

I have started selling plastic intake manifold for the first gen neons SOHCs here are some pics.

Before

After

ported were throttle body sits for a bigger throttle body.
These Intake manifolds are cleaned up very well and are ready to use. Will work realy well if you have your head partially or fully built. I sell them on Ebay or you can contact me @ Noenwarrior@hotmail.com or newdaddy_19@yahoo.com for any questions.
7-24-07 I forgot to mention a few months ago I istalled a fuel pump used from a 2005 srt-4 it works and fits perfect without changing tanks the only thing is when u put it back in the same way you old one the gas guage is backwards. meaning if you have an empty tank it reads full, when full it reads empty. lol

8-17-07 updates new parts. will be adding as I go.

oil catch can

got new turbo the one I bought was bad the shaft broke IDK how.

Pen sized Turbo timer

srt-4 cams I picked up realy cheap to go with the turbo application.

fuel regulater I ordered and never got. comfirmation says it was delivered but i never got it. pisses me off!!!!

srt guages I got and pod came with them but doesnt fit my pillar so no use for that yet.

srt-4 intercooler I got cheap

hard pipe that runs fron turbo to intercooler.
also got boost controler just havent takin pics yet. also had a BOV that came with it but that got stolen. Dumb people I swear.
when they broke in my car they took my shift knob MA audio sub, Linear amp, box, then cut my battery cables and took my brand new battery, then popped my hood and took my piping that runs to my intercooler. they did all this in the parking lot of my apartment. they hit other cars to but hit bank on mine. they better hope I dont find my shit installed on a car here when people are parked with groups to show there rides off.

Bought srt-4 computer in case I ever want to change all the wiring plus I got it cheap also. BOV and boost controller are on the way. also srt logo boost guage and air/fuel gauge with a dual carbon fiber guage pod. also waiting for my fuel regulator to get here.

Bought srt-4 intercooler and the hot side charge pipe pic soon.

8-29-07 went back to using 2.0 dohc computer one it seems to respond alot better, 2 higher rev limit,3 ur factory tach does not work with 2.4 computer due to switching wires on coil pack.

9-5-07 Ok my 95 2.4 motor has a knock getting ready to blow but i dont realy care cause none of the srt-4 parts like oil pump, water pump, ect. dont fit that motor anyways so Im working on getting a 2000 or newer motor or srt-4 block. so the projecting of getting a good running motor is still on.

shot of intercooler intalled.

bumper got broke during the winter I took out a pile of snow to get acroos the road so I just cut more of it out cause that is were my intake sat to bring in the colder air.

Bumper on without the crashbar and it doesnt hang low on one side anymore. lol hey its a good way to lose the wait till u hit something. knock on wood!!!
LOVE TO PLAY POKER AND GET BIG WINNINGS?
Click Here!