This is what most of my system is comprised of.
autotek ss600.4 100x4 @ 4ohms to power
mbquart 6.5s reference series for the rear and my alpine type x comps reference up front.
concept2400d to power the DD's
clarion dzx925
batcap wire in parallel with the stock battery. lcds and playstation 2
This is what most of my system is comprised of.
autotek ss600.4 100x4 @ 4ohms to power
mbquart 6.5s reference series for the rear and my alpine type x comps reference up front.
concept2400d to power the DD's
clarion dzx925
batcap wire in parallel with the stock battery. lcds and playstation 2
The following are pics of the car stripped of all box/port impeeding implements.
Now for the box and port construction.
ports after they have been cut from one pipe, the cut is 45 degrees but it looks sloppy painted chrome. If anyone know of a good place to have them dipped in chrom let me know.
The extension of the box which goes under the roof when folded down. These another funnel on the otherside and a piece of mdf on top. I dont know what happend to the finished product picture of that.
the box doen without the top showing how the ports work. box is only 5.6 cu ft due to some factors i didnt know until i started installing. SO im missing .4 cu ft to make the 2 dd 9515s work correctly so ill probably try it with two jsut to see and then go back to 1 @2400 watts The last image is a picture inside the ports.
there it is with the top. compliments to Le Gros for painting that for me.
the beheamiths
the hit so hard, theyve already broken a screw head, my ears, and have collected a series of complains from freinds, neighbors, co workers, doctors offices, car alarms and family members.
sorrry i didnt taking any more pics after this. i got on a roll and didnt wanan stop. But this is the wall that will be holding my amps, ports, neons, crossovers, batcap and useless capacitor aka really fancy voltimeter.
Things like this must make you ask this question. its from the cover of some weekly magazine.
