Hey im Rob this is my ride
certified inter provincial class A automotive service technician
Rollin on 15 yokohama ice tires tiby rims
and i installed front brake setup from tibby
the brakes make a big diff
custom interior professional work "mint"
2.0 dohc 01 beta plx wide band 5 wire o2 and gauge evo 8 turbo header./ t3 turbo /38 mm wastgate/ blowoff valve / oil cooler /2.5 catback exaust /turbo timer/ 550 cc injectors /8 gallon fuel cell/ 255 ltr per hr fuel pump /2.0 liter rods 1.8 liter pistons 8/8/1 for 15-20 psi /and e-manage blue /and a nitrus halo on intercooler /200 lbs tire weghts in front bumper melted in
front raidius bars gona be getting blue race slicks when i find them
not much more done yet soon to update
very hard build so far but it's worth it
the car pulls like hell man !!!!
99 Accent GSI hybrid beta I
2.0 DOHC
Body work
Clean car but i striped it because of color change
In primer ready for paint
Donor car for engine payed 400.00 60.000 kms
Smashed got it for cheap came with auto trans.
Buy a whole car you will need other parts trust me !!!!
Engine is out
very dirty engine
Ported inside to smooth runners Polished intake took about 50 hours
Clean engine
More pics
2.0 flywheel $100.00
More pics
bought new clutch for a 01 accent 1.6 liter for swap to enable beta engine to fit to alpha trans and its bigger for more torque-----------------------------------------you have to buy (from a nut&bolt company) 6 longer bolts for flywheel #10 allen head i had to shave the tops of all the heads for clutch disk clearance
Kit #:05-107 2 stage
Disc Dia. (in):8 7/16
Spline Dia. (in):7/8
No. of Teeth:20
OEM engine 1.5 L DOG 97hp
No engine about 2 hours to remove
1.5 outa here. want to buy it ;)!!!ha ha
2.0 dry fit lots of work man
have to relocate p/s pump to front of engine. and modify all mounts. cut 1" off driver side drive shaft weld to cv joint leave passenger shaft alone. wiring is the same just got to extend some pigtails
i used the elantra ecm and im keeping the AC
2.0 done running strong.valve cover and engine bay is going blue
Dash and interior out for paint
i had to scrub dash and all parts very good with silicone polish remover for fish eyes
3 coats krylon plastic paint
Interior is in i have to change floor mats and pedals install seat covers
I will up date more later
if you have any questions regarding my build leave me a message
and i will try to answer you
thank you for checking out my ride
NOTE THIS IS NOT A RACE CAR just required more passing power and better looks
