First I began by removing the spare tire and cleaning out all of the sound dampening mat. Then roughed in a 2x4 frame to support the MDF and to allow for clearance for the subs.
Once I did some measurements and cut my mdf to size I then split the piece in half to put it in the trunk. Notching the corners where I needed to.
After both pieces were in I did a test fit of the subs, and then started fibergalssing the mdf for strength and to remove the notch in the middle.
After glassing, we installed the carpet and then the subs followed by the air tank for the train horn.
Page 1 = Specs and Such
Page 2 = Performance
Page 3 = Neuspeed Sport Spring Install 01/19/2008
Page 5 = Random Pics
