Update 12/29/08 For sale 15k, i will trailer it to anywhere in the US for Free!
Under Construction Its assembly time!
UPDATE: 6/24/08 I received my nismo transmission mount, nismo front strut bar, and Boomslang E-Manage Ultimate Plug-n-Play wiring harness today, i will have pictures of the wiring harness differences between the Greddy universal unit and the boomslang unit, the Boomslang wiring harness is AWESOME, truely plug and play. Picture is below!
UPDATE: I installed the engine this past weekend, took less than half the time to install it than pull it out. The ACPT single piece drive shaft is installed, though i dont have a picture of it. I removed all the smog crap, but now i dont know what to do with all the connections, i have like 2 or 3 i dont know about. The a/c condenser, radiator, and electric fans are in, I need to get my downpipe made and I/C piping completed.
Here are two pictures from this weekend.
New pictures on page 6, the headlights and taillights are finally working. I pulled the old KA24 on 12/10/07, pictures will be below
This is a Stage II TopHat Performance KA24de-T, I have the Brian Crower stage 2 cams in it, New alternater, Mandrel bent turbo Manifold, a JGY shortened intake manifold, lightened flywheel, etc. Its not in the car yet, but soon it will be. The guys in the picture are my Brother Grant (right) and a long time friend Rob (left).
Look at Page 5, Carbon fiber doors and fenders installed! mirrors are installed but i have an issue, they are JDM and arent for a left hand drive car, so if i want the power folding mirrors im gonna need to tweak them. Feedback is appreciated, thanks to everyone that has helped so far!
my 240sx was a green 98' 4lug, non SE, non ABS base model car. I purchased it on Ebay summer of 03' for a grand wrecked. I got the frame straightened.
switched from 4lug to 5lug hubs, upgraded the front and rear brakes to z32 brakes and z32 E-brake then got the Rotora 14" z32 brakes, 19"x9.5" front and 19"x10.5" rear Axis Hiro Anthracite Rims, Toyo Proxis T1R tires.
List of Mods
Exterior
-C-West S14 DRFT side skirts and rear bumper
-S15 DRFT front bumper
-Seibon carbon fiber doors
-Seibon trunk
-carbon fiber s14.5 front fenders
-S15 carbon fiber vented hood
-S15 core support
-S15 headlights
-Painted Mitsubishi Graphite Grey metallic (looks good with carbon fiber)
-all new seals around the windows
-removed antenna hole
Interior
-New Carpet
-S15 Steering wheel
-S15 scuff plates
-S14 Digital Climate Control
-Nismo carbon fiber gear shifter
-Carbon fiber A pillars incorporating a double gauge pod
Suspension
-Tein coilovers w/EDFC
-Tein tension bars
-Nismo power brace
-Suspension Techniques front and rear sway bars
-Nismo LSD
-new subframe
-Nismo front and rear Strut Bars
Brakes and Rims
-braided front and rear brake lines
-300zx Nismo master brake cylinder
-5lug conversion (powdercoated the spindles black)
-300zx E-Brake conversion (pain but allows for the huge brakes)
-Rotora 14" big brake kit for a 300zx, 6 piston front, 4 piston rear
-19" Axis Hiro rims, Anthracite with polished lip. 9.5" front 10.5" rear
-Toyo Proxes T1R's front 255/30ZR19, rear 285/30ZR19
Performance
-JIC full titanium exhaust (expensive)
-Random Technologies Catalytic converter
-Optima Yellow top
-TopHat Performance Stage 2 KA24DET
-fidenza flywheel
-B&M short shifter
-ACPT carbonfiber driveshaft
-Greddy FMIC
-Nismo thermostat
-Nismo motor mounts and transmission mount
-Electric fans, dual pull
-JGY fuel rail
Mods that i have not yet installed, but have ordered/received:
-pair of Bride Brix II Gradation seats
-Defi gauges
-Carbon fiber A-pillars
-Greddy E-Manage Ultimate
-Greddy Profec B II boost controller
-Takata 4 point harnesses
-Greddy aluminum BOV flange and Type RS BOV
-Greddy turbo timer
Should be assembled in the next two months.
Please leave comments, and 5 Stars is greatly appreciated!
Page 1: Overview
Page 2: Interior
Page 3: S15 front end
Page 4: Rear End
Page 5: New Pictures
Page : Pictures as of 7/1/07
