HYDRO SHIT!!
LINK TO HYDRO INSTALL!!
http://www.dippy.org/forum2/index.php/topic,1027.0.html
i know its messy n dirty, but its also unfinished.
10/10/07-bought 6 noids for $95 at the local parts store.ill be running 4 batts with 6 noids at 48 volts
==============================
10/11/07-switchbox for hydros.im making it in the shape of a coffin to match the "theme" of my car with all the skulls.
===============================
switch cord and dumps. im gonna try n polish up the dumps so they shine.
===============================
10/15/07-10/20/07 -bought two 5 foot shots of 1/8" 2"x3" rectangle tubing to make frame connectors
got the one end half cropped out to fit over the rear frame rail
got the other end cropped out to fit the front frame
hits the floor boards in the middle so i had to heat and beat the ribs in the floor to get it to fit better
welded a piece in the tube to help strengthn it and help keep debris out
11/3/07frame connectors installed
my pops welding em in
=================================
10/17/07-bought my other 6 switches and got my switchbox wired up,still gotta finish the box and wrap it with black vinyl
=================================
10/18/07-painted my tanks metallic black
=================================
10/22/07-painted my backing plates and blocks metallic blue and put the tanks on the blocks
==================================
10/25/07-picked up more steel. two 2' shots and two 3' shots of 1.5x1.5x.25" angle for a battery rack
and a 4' shot of 6" wide and 5/16" thick channel to make a "bridge" over the rear axle to support the springs and cylinders
===================================
1/23/08-picked up two 15' and two 4' hoses for $146.50
also got a quick disconnect for the ground cable for FREE
===================================
4/22/08-got a set of aluminum isolater mounts for $115
brand spankin new
the carnaliage of the old ones
one of the new ones installed
right front mount from the engine bay
poor pic of the left rear mount
5/29/08-started workin on the trunk setup about a week ago. i still gotta make a lil battery tray,weld the 3 together,and add the hold down. then i gotta make something for the pumps to mount to,and the noids.
6/11/08-started on the trunk work. got the tubes going from frame rail to frame rail,after a lot of greef. and i got 2 support bars for the batt rack,which will also hold the pumps. still LOTS to do and my goal is to have it done before the 4th of july.
batt rack mocked up
and the other framework. still gotta add to bars for the pumps to mount to and weld the batt rack in
page 1-training day chrysler
page 2-interior/trunk
page 3-engine/drivetrain
*u r here*
page 5-car show pics
page 6-parts/things i would like done
page 7-juiced 87 5th (not mine)
page 8-websites/forums
page 9-parts cars
