anferny’s 2001 Volkswagen Bora

Future plans for my Bora: Like the idea of a new grille and really want to retain my VW badge, I aint ashamed to be driving a VW so don't want to de-badge. V5 rear skirt for some subtle pipes i'm planning on adding, I want to keep the original config to keep it lookin' clean Wolsburg badges, again OEM adds a bit of a difference... These pics need no explaining, if I ditch the original wood these are the must haves, just need to get on with it I guess Thanks for looking,

My PD 130 Bora / Jetta Sport Now with my plate on, 18" RS6 wheels with 225/40/18 and some 35mm Jamex springs Here it is on the day i collected it, as a totally standard Sport model, it's nice and drove well but really needed new wheels to fill the huge arches I chose Audi RS6 wheels for the OEM look and they're really easy to keep on top of, would've loved some split rims but cost and hassle is a major consideration for me right now, once fitted they made the car look like an off roader so I had to go and get some springs, I went with Jamex 35mm lower, kind of wish I'd have upped my budget and gone for coilovers, maybe I'll add them to my christmas list And then, with the 35mm Jamex springs Here's the interior, I did plan on a sSlver or brushed aluminium inlay replacement but haven't found a suitable kit yet, they all seem to be cheap stick on rubbish and I just can't warrant spending the money on OEM VW parts its a good ?400 to do it right. Otherwise it's just fine! Nicely tucked.... Here's my last Bora, was only a 1.6 SE but in a good colour and with sant Monicas.... So, take a look at the rest of my garage and leave a note in my mail. Page 2: Future mods

Future plans for my Bora: Like the idea of a new grille and really want to retain my VW badge, I aint ashamed to be driving a VW so don't want to de-badge. V5 rear skirt for some subtle pipes i'm planning on adding, I want to keep the original config to keep it lookin' clean Wolsburg badges, again OEM adds a bit of a difference... These pics need no explaining, if I ditch the original wood these are the must haves, just need to get on with it I guess Thanks for looking,

My PD 130 Bora / Jetta Sport Now with my plate on, 18" RS6 wheels with 225/40/18 and some 35mm Jamex springs Here it is on the day i collected it, as a totally standard Sport model, it's nice and drove well but really needed new wheels to fill the huge arches I chose Audi RS6 wheels for the OEM look and they're really easy to keep on top of, would've loved some split rims but cost and hassle is a major consideration for me right now, once fitted they made the car look like an off roader so I had to go and get some springs, I went with Jamex 35mm lower, kind of wish I'd have upped my budget and gone for coilovers, maybe I'll add them to my christmas list And then, with the 35mm Jamex springs Here's the interior, I did plan on a sSlver or brushed aluminium inlay replacement but haven't found a suitable kit yet, they all seem to be cheap stick on rubbish and I just can't warrant spending the money on OEM VW parts its a good ?400 to do it right. Otherwise it's just fine! Nicely tucked.... Here's my last Bora, was only a 1.6 SE but in a good colour and with sant Monicas.... So, take a look at the rest of my garage and leave a note in my mail. Page 2: Future mods

My PD 130 Bora / Jetta Sport Now with my plate on, 18" RS6 wheels with 225/40/18 and some 35mm Jamex springs Here it is on the day i collected it, as a totally standard Sport model, it's nice and drove well but really needed new wheels to fill the huge arches I chose Audi RS6 wheels for the OEM look and they're really easy to keep on top of, would've loved some split rims but cost and hassle is a major consideration for me right now, once fitted they made the car look like an off roader so I had to go and get some springs, I went with Jamex 35mm lower, kind of wish I'd have upped my budget and gone for coilovers, maybe I'll add them to my christmas list And then, with the 35mm Jamex springs Here's the interior, I did plan on a sSlver or brushed aluminium inlay replacement but haven't found a suitable kit yet, they all seem to be cheap stick on rubbish and I just can't warrant spending the money on OEM VW parts its a good ?400 to do it right. Otherwise it's just fine! Nicely tucked.... Here's my last Bora, was only a 1.6 SE but in a good colour and with sant Monicas.... So, take a look at the rest of my garage and leave a note in my mail. Page 2: Future mods

Future plans for my Bora: Like the idea of a new grille and really want to retain my VW badge, I aint ashamed to be driving a VW so don't want to de-badge. V5 rear skirt for some subtle pipes i'm planning on adding, I want to keep the original config to keep it lookin' clean Wolsburg badges, again OEM adds a bit of a difference... These pics need no explaining, if I ditch the original wood these are the must haves, just need to get on with it I guess Thanks for looking,

Future plans for my Bora: Like the idea of a new grille and really want to retain my VW badge, I aint ashamed to be driving a VW so don't want to de-badge. V5 rear skirt for some subtle pipes i'm planning on adding, I want to keep the original config to keep it lookin' clean Wolsburg badges, again OEM adds a bit of a difference... These pics need no explaining, if I ditch the original wood these are the must haves, just need to get on with it I guess Thanks for looking,

My PD 130 Bora / Jetta Sport Now with my plate on, 18" RS6 wheels with 225/40/18 and some 35mm Jamex springs Here it is on the day i collected it, as a totally standard Sport model, it's nice and drove well but really needed new wheels to fill the huge arches I chose Audi RS6 wheels for the OEM look and they're really easy to keep on top of, would've loved some split rims but cost and hassle is a major consideration for me right now, once fitted they made the car look like an off roader so I had to go and get some springs, I went with Jamex 35mm lower, kind of wish I'd have upped my budget and gone for coilovers, maybe I'll add them to my christmas list And then, with the 35mm Jamex springs Here's the interior, I did plan on a sSlver or brushed aluminium inlay replacement but haven't found a suitable kit yet, they all seem to be cheap stick on rubbish and I just can't warrant spending the money on OEM VW parts its a good ?400 to do it right. Otherwise it's just fine! Nicely tucked.... Here's my last Bora, was only a 1.6 SE but in a good colour and with sant Monicas.... So, take a look at the rest of my garage and leave a note in my mail. Page 2: Future mods

My PD 130 Bora / Jetta Sport Now with my plate on, 18" RS6 wheels with 225/40/18 and some 35mm Jamex springs Here it is on the day i collected it, as a totally standard Sport model, it's nice and drove well but really needed new wheels to fill the huge arches I chose Audi RS6 wheels for the OEM look and they're really easy to keep on top of, would've loved some split rims but cost and hassle is a major consideration for me right now, once fitted they made the car look like an off roader so I had to go and get some springs, I went with Jamex 35mm lower, kind of wish I'd have upped my budget and gone for coilovers, maybe I'll add them to my christmas list And then, with the 35mm Jamex springs Here's the interior, I did plan on a sSlver or brushed aluminium inlay replacement but haven't found a suitable kit yet, they all seem to be cheap stick on rubbish and I just can't warrant spending the money on OEM VW parts its a good ?400 to do it right. Otherwise it's just fine! Nicely tucked.... Here's my last Bora, was only a 1.6 SE but in a good colour and with sant Monicas.... So, take a look at the rest of my garage and leave a note in my mail. Page 2: Future mods

Future plans for my Bora: Like the idea of a new grille and really want to retain my VW badge, I aint ashamed to be driving a VW so don't want to de-badge. V5 rear skirt for some subtle pipes i'm planning on adding, I want to keep the original config to keep it lookin' clean Wolsburg badges, again OEM adds a bit of a difference... These pics need no explaining, if I ditch the original wood these are the must haves, just need to get on with it I guess Thanks for looking,

My PD 130 Bora / Jetta Sport Now with my plate on, 18" RS6 wheels with 225/40/18 and some 35mm Jamex springs Here it is on the day i collected it, as a totally standard Sport model, it's nice and drove well but really needed new wheels to fill the huge arches I chose Audi RS6 wheels for the OEM look and they're really easy to keep on top of, would've loved some split rims but cost and hassle is a major consideration for me right now, once fitted they made the car look like an off roader so I had to go and get some springs, I went with Jamex 35mm lower, kind of wish I'd have upped my budget and gone for coilovers, maybe I'll add them to my christmas list And then, with the 35mm Jamex springs Here's the interior, I did plan on a sSlver or brushed aluminium inlay replacement but haven't found a suitable kit yet, they all seem to be cheap stick on rubbish and I just can't warrant spending the money on OEM VW parts its a good ?400 to do it right. Otherwise it's just fine! Nicely tucked.... Here's my last Bora, was only a 1.6 SE but in a good colour and with sant Monicas.... So, take a look at the rest of my garage and leave a note in my mail. Page 2: Future mods

Future plans for my Bora: Like the idea of a new grille and really want to retain my VW badge, I aint ashamed to be driving a VW so don't want to de-badge. V5 rear skirt for some subtle pipes i'm planning on adding, I want to keep the original config to keep it lookin' clean Wolsburg badges, again OEM adds a bit of a difference... These pics need no explaining, if I ditch the original wood these are the must haves, just need to get on with it I guess Thanks for looking,

Future plans for my Bora: Like the idea of a new grille and really want to retain my VW badge, I aint ashamed to be driving a VW so don't want to de-badge. V5 rear skirt for some subtle pipes i'm planning on adding, I want to keep the original config to keep it lookin' clean Wolsburg badges, again OEM adds a bit of a difference... These pics need no explaining, if I ditch the original wood these are the must haves, just need to get on with it I guess Thanks for looking,

My PD 130 Bora / Jetta Sport Now with my plate on, 18" RS6 wheels with 225/40/18 and some 35mm Jamex springs Here it is on the day i collected it, as a totally standard Sport model, it's nice and drove well but really needed new wheels to fill the huge arches I chose Audi RS6 wheels for the OEM look and they're really easy to keep on top of, would've loved some split rims but cost and hassle is a major consideration for me right now, once fitted they made the car look like an off roader so I had to go and get some springs, I went with Jamex 35mm lower, kind of wish I'd have upped my budget and gone for coilovers, maybe I'll add them to my christmas list And then, with the 35mm Jamex springs Here's the interior, I did plan on a sSlver or brushed aluminium inlay replacement but haven't found a suitable kit yet, they all seem to be cheap stick on rubbish and I just can't warrant spending the money on OEM VW parts its a good ?400 to do it right. Otherwise it's just fine! Nicely tucked.... Here's my last Bora, was only a 1.6 SE but in a good colour and with sant Monicas.... So, take a look at the rest of my garage and leave a note in my mail. Page 2: Future mods

Future plans for my Bora: Like the idea of a new grille and really want to retain my VW badge, I aint ashamed to be driving a VW so don't want to de-badge. V5 rear skirt for some subtle pipes i'm planning on adding, I want to keep the original config to keep it lookin' clean Wolsburg badges, again OEM adds a bit of a difference... These pics need no explaining, if I ditch the original wood these are the must haves, just need to get on with it I guess Thanks for looking,

My PD 130 Bora / Jetta Sport Now with my plate on, 18" RS6 wheels with 225/40/18 and some 35mm Jamex springs Here it is on the day i collected it, as a totally standard Sport model, it's nice and drove well but really needed new wheels to fill the huge arches I chose Audi RS6 wheels for the OEM look and they're really easy to keep on top of, would've loved some split rims but cost and hassle is a major consideration for me right now, once fitted they made the car look like an off roader so I had to go and get some springs, I went with Jamex 35mm lower, kind of wish I'd have upped my budget and gone for coilovers, maybe I'll add them to my christmas list And then, with the 35mm Jamex springs Here's the interior, I did plan on a sSlver or brushed aluminium inlay replacement but haven't found a suitable kit yet, they all seem to be cheap stick on rubbish and I just can't warrant spending the money on OEM VW parts its a good ?400 to do it right. Otherwise it's just fine! Nicely tucked.... Here's my last Bora, was only a 1.6 SE but in a good colour and with sant Monicas.... So, take a look at the rest of my garage and leave a note in my mail. Page 2: Future mods