This pic is what my car supposed to look like when I am finished. It has taken me awhile to get the driver's side completed. I have been working part time in my shop to complete it. All I lack now is blending it in with the rest of the car and priming it. The passenger's side has not been completed at this time. After some holes were placed in my car by a no name shop for remote mounted turbos in the rear quarter led me to take action for some remote mounted oil coolers. I have placed the pump, oil cooler and all the wiring inside the rear quarter behind the door opening. One oil cooler is for the rear diff and the other for the t-56 six speed. I would like some feed back on what you think about this install and the wide body kit that I am making from scratch.

The pic on the left shows a seam that is noticable. This is due to the complex design of the parts. This is the point at which both the inner fender and the outer Quarter adhere.

t    

The pic on the left shows the indention of the flare. When the rear bumper cover is placed on the car nothing will be seen. On the right is a pic of the contour in relation to the door and Quarter. This contour was designed by means of a laser line and took a bit of time to figure out. The side skirt has to meet at the same points as the Quarter and door combination.