This car is almost where I want it to be. After the recent ECU swap to the Haltech E6X to control fuel and timing instead of the F10x which only controls fuel I now put down over 400whp on pump gas daily.

A special thanks goes out to my sponsors who without them I could not have done this.

5/17/08 UPDATE: As of this week I have now built the cylinder head and have a new redline of 8700RPM. I will be dyno'ing mid June to see how high in the 400s I can get on pump gas.

5/20/08 UPDATE: I have completely replaced almost all of the piping in my engine bay. I now have 2.5" mandrel bent intercooler piping and a full 4" intake to match the GT35r inlet size so there are no more restrictions. The gains were INSANE!

9/5/08 UPDATE: 432whp / 366wtq @ 19psi on 93 octane - Carlos at Creative Performance is second to NONE!

www.StreetUnit.com

www.CPBoost.com

www.onlinemazdaparts.com

----------------------------------------NEW INTAKE - POWDER COATING IT SOON----------------------------------------

Engine:
- Fully Built Motor
* Wiseco Pistons 8.1:1 CR
* Pauter Rods
* Cosworth Bearings
- GT35R Turbo w/ Tial External Wastegate
- 3" CPBoost Downpipe
- CPBoost Tubular Manifold
- Haltech E6X ECU
- 750cc Injectors
- Engine Torque Dampener
- Street Unit Solid Rear Engine Mount
- Reactive Racing Port & Polished Engine Head
- Competition Valve Job
- Valve Spring Upgrade
- Titanium Retainers
- New Redline is 8700RPMs

Transmission:
- ACT Custom Clutch
- Billet 3rd and 4th Gears
- Quaiffe Limited Slip Differential

Gauges and Accessories:
- LC-1 Wideband Air Fuel Kit
- XD-16 Gauges for Boost, Oil Pressure, EGT, and AFR

Interior & Audio Visual:
- Pioneer Avic D3
- Alpine Type R Compenents in front 60rms to each
- Alpine Type R Coax in the back 60rms to each
- 60x4rms amp hidden in the trunk
- JL 13w6 Sub in custom box
- Xtant 1000.1 Sub Amplifier
- Pioneer Rearview Camera
- Two Trumpet Train horn w/ 150psi Compressor
- All Accent Lights Changed to White LED

Exterior Styling:
- MS3 OEM Wheels w/ 225/40/18 BF Goodrich GForce Sports
- LED Tail Lights and 3rd Brake Light
- Smoked Reflectors
- 6000k 50w HID Kit
- Custom fabricated projector 35w 6000k HID fog lights
- Angel Eyes w/ custom remote fade on and off capability
- 15% tint all around and the entire windshield tinted 50%
- Replica Garage Vary front lip molded to front bumper
- Kenstyle Sides
- Kenstyle Rear

Suspension:
- Road Magnet Springs
- Eibach Adjustable Camber Links
- MazdaSpeed Front and Rear Sway Bars (26mm Front and Rear)