Interior Mods: I have done more interior mods than anything else. I still have to get AC Schnitzer pedals, dead pedal, AC Schnitzer floormats, OEM anthrazite headliner, a few little things, and reupolstered seats/door panels.
DIY: HK Rear Subwoofer Rattle:
I've heard alot of people complaining about this problem. The problem is this: cars equiped with the upgraded HK system , sometimes the rear deck rattles. I've collected alot of fixes but the one I am posting is the one that worked the best.
Home Depot: $0.93
-(1) 3/8" diameter hex bolt threaded all the way 3" inches long
-Two nuts to hold that in place
If you have not had the HK subs out of your car, do it. there are a couple screws that comes out to get the HK subs out. Once removed, you will see a hole dead center underneath the rear deck. This is where you slide the 3" bolt in but first put one nut through the bolt all the way through. Then you slide the bolt up the hole, and put the other nut on the screw. Basically, you want to sandwich the rear deck metal piece with the two nuts. Tighten really hard with tools if you have any. That is about it, it should rattle alot less if rattle at all.
NOTE: photos below shows the bolt & nuts (silver in color)
*OEM Matte Chrome Interior Trim*
51 16 0 002 763
51 41 8 236 125
51 41 8 259 963
51 41 8 259 964
51 43 8 257 961
51 43 8 257 962
*OEM Roll Cover Compartment*
51 16 7 038 323
*AC Schnitzer E-brake*
*AC Schnitzer Multi-piece shift knob*
*E46 ///M3 Steering Wheel*
32 34 7 833 355
*OEM Round Airbag*
32 30 1 096 808
UPDATE: Back to OEM. Red Needles/Silver Rings/ACS Decal
*NR Gauge Faces w/ Silver Gauge Rings*
Custom AC Schnitzer decal
The red needles above are an easy DIY. Get yourself a red sharpie perminent marker and gently color the needles. NOTE: only color the top of the needles, do not color the sides nor the back!
