This car is for sale i will have the final pics of it in a day or two and my contact info is included on the last page.

Please read all pages to see how this car turns out!!!!!!!!!!

Page 1 Car work started
Page 2 Car work ending
Page 3 Car done pics

This is my 1989 supra. I just baught it a few months ago.
For one the rear diff was bad. the motor had a nocking noise. and a couple of other small things. Sence i have gotten it i have blown the motor completely rob threw the side of the motor and i was picking some rod and piston parts out of the oil pan. So i pulled it out and also found that the clutch was almost gone. So i have gotten a new motor straight from Japan with no emissions on it ha ha ha. New clutch, i have also gotten 18" BSA rims ans tires. As u can see it has gotten 4 point harnesses installed. There were also no ebrake pads that set me back $125 for shoes. New rear end. new passenger side mirror, had to rehang the passenger side door and a new fender up fromt from the door sagging. There was a couple small spots of rust that have been taken care of. It has more goodies comming and i will be up dating. Like a new paint job and mabye some nos.

Update
I have gotten the new jap motor in it took some changing and reworking because the motor is different from the american one. Everything is going good and pics will be comming soon. I will be firing it up soon and letting u know when i do. Also please if u are intrested in this please look at the last car i built and sold to one of u. it is also on the site. thanks i will be up dating soon.






i have added more pics and i am still in the process of hooking up the motor. Getting a motor from japan is not as easy as u think i am still dealing with the numerous differences from japan. If u are thinking about doing this ask me there are manu things that lots of books and others will not tell u. i am not done yet but when i finish i will update again.

Update 5/16/07 Shes alive shes alive i fired her up to day and she lives. she runs great i have not driven it on the road yet it still needs to be painted. everything is done except lowering it and painting it. i have some ideas but i would like to hear some more if u have an idea let me now or i will do what i am planning on doing,but i am keeping it mostly red. thanks for looking i will update again soon.

Update 5/25/07 i just got the intake i ordered and the custom interor peaces i had made. i am also preping for paint so i will add pics. Notice the shifter boot and the ebrake boot, also if u look the cover for the slorage/ arm rest matches. and it all flowes. i think it looks great. not bad for a couple hours and $20.

Update 6/9/07 i have goten a new oil pump and rack and pinion. soon to be installed. i have also just goten a set of lambo doors witch i am installing. i will have pics comming soon.

Update 6/12/07 i have gotten one lambo door done and there are pics as u can see i am working on the other as well as the oil pump and the rack and pinion. i also have a steering wheel on the way and soon to be painting i hope i will keep updating. stay tuned for more.
Both doors are done now for the oil pump and rack. i will let u know update 6/16/07.
update 6/19/07 i got the steering wheel as u can see and i am installing my oil pump its a bitch the chilson book for the car lies it sais to just lift the front of the motor up and it will slide out. ya right no way in hell the hole motor needs to come out or the h frame needs to be dropped. i will not be adding pics of it. this will be the last update till i paint i thi9nk so keep looking for the end pics.

Update after installing my lambo door and my oil pump .for some reason now my horn does not work and the car will not start. so i am back to tracing wires i was told that the horn and ignition are wired together because of the alarm so i am looking and i think i have found the problem i should have it fixed and running tomarrow.(07/03/07)