Under Construction! (All that�s needed is for me to post pic of ignition with white bulb)
How-To Change Ignition Light from Stock Greenish Color to White, or Blue, or Purple/Blue Color
Tools Needed:
Phillips Screwdriver
--For Bulbs--- See Bottom of page
1)Remove the 5 screws under steering wheel cover with a Phillips screwdriver. This will remove top & bottom of steering wheel cover.
2) Pry open steering wheel cover with hands. Pics shows where it�s easiest to pry open.
3) Take top of steering wheel cover off. You can take the bottom off too but I didn�t since you can access ignition light without removal of bottom cover.
4) Now twist off part as shown in above pic. This will give you access to ignition light.
5) Now twist off where I circled in above pic to gain access to bulb (above left pic shows how bulb will look like painted blue with a sharpie marker).
5a) Now if this is your first time then a �green condom� will be on bulb, just remove (above right pic shows what the �green condom� looks like).
6) Now put everything back together & your Done!(above pic has the blue bulb installed)
-------------------------------------------------------------------------------------------------------------------------
A) For White bulb, all you need to do is remove �green condom� from Stock bulb. Don�t have a pic yet of how white bulb looks on.
B) For Blue Bulb, order the 74 bulb from this Ebay Seller:LINK:
Above left pic shows what you get. Above right pic shows what bulb looks like on.
C) For Purple/Blue bulb, remove �green condom� from Stock bulb, & then color stock white bulb with a blue sharpie marker. For Best results color bulb 5 times but let dry each time you begin to color bulb again.
Above left pic shows what was used (circled is the �green condom� you have to remove from stock bulb). Above right pic shows what it looks like @ night.
