Top, Bottom: Upper window panel corners patched and primed.

Top: Fitting and welding dash panel patch. Note wood spacers in vent hole.
Bottom: Dash panel patch and welds grinded. Phosphoric acid applied on grinded welds to neutalize new rust formation.

Top: Frame member corner support with patch ready to apply.
Bottom: Welded patch in place (welds partially grinded).

Top: Frame member corner support with patch with welds grinded and ready for primer.
Bottom: Floor panels spot welded in place (all panels and patches MIG welded).

Top: Before and after grinding welds and priming floor panels.
Bottom: Middle rocker panel ready to be place on body. Note sealant used in inner suport and patch brace.

Top: Passenger side middle rocker panel placed on body.
Bottom: Passenger side door post placed on body. Middle rocker panel painted and ready for outer rocker panel.

Top: Small patch ready for placement on inneer door panel. Inner rocker panel ready for outer rocker panel. Note paint removed for spot welds.
Bottom: Passenger side outer rocker panel placed on body.

Top: Small patch for drivers side door post.
Bottom: Driver side rocker panel placed on body and welds grinded. Note front fenders and door used on body to align outer rocker panels.

Top: Rear fender front corner placed on body and welds grinded.
Bottom: Passenger side rear fender front corner placed on body and ready for welding. Note clamps holding panel on body.

Top: Rear fender with damaged sections cut away.
bottom: Passenger side inner rear fender panel placed on body and spot welded in place. Note clamps holding patch on body and creaces on patch to match contour of panel.