Finally installed the Aisin manual hubs that I got for free!
The cone washers where being a bitch but they came off after we whacked them with a brass hammer :)
*update may 30th*
I got my truck back from Johnny at sea 2 sky tuning, I had done:
Sea 2 sky 256 deg cams
OEM waterpump
New belts
number 3 cylinder injector tip boot
and a major engine cleaning.
If you got a toyota 3.0 or 3.4L and want more power AND fuel savings check out Johnnys stuff!
www.sea2skytuning.com
I will get a sound clip in the next few days.
Today being such a nice day I decided to wash the truck after I got home.
It was only a 10 min wash as I had to get to work but it looks MUCH better
and the other side
Now this is going back to when I got my cams done.
When Johnny was about to pull the passenger side cam he saw that it was in fact cracked in 2 places no less.
Now the only way to crack these cams is if you install them wrong or uninstall them wrong (unbolting in the wrong order will put stress on the one area causing it to crack)
I went up to toyota and explained the situation, I got alot of bs, and some really stuck up attitudes. Not impressed, of course toyota denied it and told me to suck it up.
nice...
*Update June 13th*
Well we finally put my Marlin crawler 1200lb semi metalic clutch in today and WOW.
It has made a BIG difference for SURE, I have to re-learn my driving habbits though, I have trouble starting from 1st gear now :D
But the biggest difference that was made was from the Marlin crawler shifter seat and shifter bushing.
Before this my transmission had VERY sloppy shifts, each gear did NOT feel like it was fully engauging AND 5th and reverse did not work unless you twisted the shifter.
After all those things have been fixed. It has NICE crips shifts, 5th and reverse work BEAUTIFUL!
If anyone has a 89-95 toyota pickup or 90-95 4runner with a 5pd, GET this stuff.
The seat and bushing only cost me roughly 12 bucks shipped up to me across the border.
For that price it is now the BEST mod I have done.
I also tried to remove my sway bar but its seized... damn rust.
turns out that is the cause of the MAJOR squeaking sound, so I just shot it with some deep creep. All fixed.
*update June 24th*
Its raining pretty hard out so I thought I would post up some new pictures.
Did a little flexing after a bike ride, I have still yet to remove the sway bar..
I have ordered a new o2 sensor and e-brake cable.
I will be ordering my 3" performance accesorys body lift this week somtime.
All said parts will be installed in july.
