This is my 1992 Sonoma XLT Ext. Cab. All the mods done to this vehicle have been done by myself. My truck is 100% built and not bought.
Mods Include: 16" Konig "RuggedRoad" Rims, 2" Belltech Nitro Drop Suspension, 2" Drop spindles on front, 3" Drop blocks on rear, Trex Phantom Billet Grill, 3:73 Gears and replaced posi rear end from a 1993 Blazer, Helix Throttle Body Spacer, K&N air filter with open air intake, Dual Exhuast, Lakewood Traction Bars, Hypertech Chip and Programmer , M3 Mirrors, Clear Corners and Signals, Chrome bumper, Steel roll pan, Euro Tails, Shaved Tailgate and Cross drilled front rotors
Interior Mods: Fully Sponsored Coustic/Streetwires Stereo, Eclipse Head Unit, Custom Built Fiberglass sub enclosure, center console, and door speaker pods. APC steering wheel, Neons
These are the new lakewood traction bars and 3" drop blocks i put on. You can see the Belltech suspension there as well... I will put updated pictures of the trucks stance once spring comes and i can put my rims back on.
Rear Wheel Clearance
Spring is finally here! My rims are now on, i removed the red stripe and the xlt badging on the sides. I also added a T-rex Phantom billet grill and it looks awsome!
Before
After
The stock grill wasnt bad but the drivers side parklight holder was broken when some jerk hit an run me in walmart parking lot so i got a grill from pick-n-pull and added a T-rex Phantom billet grill.
This grill definetly sets the truck apart from the other sonomas in town!
Got bored so I went for a cruise and took some night shots(sorry about the poor quality)
Yes they are very close to the ground. they rub pulling up onto curbs but it seems to clear speedbumps if i go slow. These bars are not for show...they are very much needed and the tires still spin shifting into second gear.
Frame Clearance
AMI 6" Billet antenna and Project M3 Mirrors APC Steering wheel
A couple close ups on the rims and rear wheel clearance
Update 15/08/2009
I went and bought a Tailgate Skin from FBI rides..This was a really nice peice that fit very well and was easy to install. I also ordered the handle relocation kit. I think it turned out real nice, its still in primer and should be painted the new next day or to. I also added some dual corvette style tips. 3.5" outlets. Let me know what you think!
Corvette Style Tips
Handle relocation kit
Update 20/08/09
Painting is alll done and it turned out flawless. Im going to need to polish it up a little bit so the colour will be closer but all in all it looks great.
Looks like a dragster from behind
Thanks for checking out my truck! Rate and comment and i will return the favour!
