started out as a 2 wheel drive with no motor that was at the shop and i had all these parts laying around the shop so i started puting thangs together so this is how far iv got.hp d44 ,9'' in the rear full width axles 4.11s,np435 to a np205 building a 450-500hp motor 351w with clevland 4v quench chamber heads,costom ross forged pistons on 400m rods, 351w intake.going to run 38's on it.if any body has any advice on anythang or any questions's rattle my cage.i will be updating this page as often as my ranger.i did a lot since a year ago.dana 60 front 4 linked .im building a 427 cleavor stroker thats has about 13:1 cr.and at the same time i fab/install the new motor im going to install a propane system on it so i can run propane.im also going to get a dana60 rear and 4 link it in the future.
