I have had this car for a few years now, Built 355, new interior and exterior parts. I have most of the car finished now. This winter I will finish everything and start looking around for a standard transmission setup for it. All pictures are in order from newest top to oldest bottom.

       These are my newest pictures of my new air intake system. I built it with my dad and my girlfriend and i painted it. It's not quite done, i have to replace the stovepipe with something else but for now it makes a huge difference in the performance of my car. I had to make something like this because from the top of my carburator to my hood is only about 3 inches at the most. Took some time and patience but there it is, i think it turned out pretty good.

Here are a few pictures of the car with the new interior almost finished and the engine in.

>some pics of my rebuilt 350. bored .030 over, crane cam, edelbrock performer intake, edelbrock carb, 305 HO heads.

>basically a new engine, Had to build it from scratch. Sent the crank out for machining, had to bore it over because when the valve on #4 blew it took out the cylinder wall with it. I put a mild cam in it just for some more lift, i didnt want it to effect my idle on this engine. I rebuilt a set of 305 HO heads and bought an edelbrock performer intake and an edelbrock carb for it.

>you can see bits of lime green on there...because my boss painted my engine for me while i was on holidays, the nice guy that he is.Lime green heads and a yellow block.

Pictures of the old interior and the old 350...Thats it....blew it driving the car for my first time. It was worth it though because now with a fresh rebuild the car is insane.

>Future Plans:

-Paint

-Sound System

-Window Tint

-Standard Transmission

-Custom Inset Headlights

-New seals

-Cowel Hood

-Corvette Rims