Pictures to help with my mods
Vacuum Diagram:
The pic below shows the kickdown cable anchor point added to the carb linkage:
The pic below shows the 2bbl T2 bracket compared to the 4 bbl T4 bracket.
The next pic show this setup on Glenn's Firebird:
Here's the manifold I bought (it's a 68)
Here's the repro tach dash I installed. It came out really good except that the unit leaks light at night, so from the side (ie, passenger seat) it appears to not be mounted flush against the dash. it will do until I some day get a hood mounted tach, I guess.
Next comes the TH350, Hurst V2 shifter, the newly rebuilt Qjet, a summit 2800 cam (and lifters, timing chain, springs, etc). That should be good for a while until I'm ready to select what gears I want to upgrade to with a posi. When done, it should look like this:
UPDATE: ALL ABOVE MODS DONE... SEE NEXT PAGE!!!
.
.
.
Here's a bunch of misc pics and images I need to host for posting:
And here's what happens when you use the OEM splash shields with aftermarket springs:
=========================
