Exterior
You cant tell but the car is still Midnight blue 
Doesn't look like much now cause accept for the radio and rims it's stock, the rims are keystone...
Finally found the tail lights
Plans:
My plans is to after bodywork paint it red with black Boss strip and canadian Cobra GT stripe(below) with removing body trim. The other parts such as sideviews, louvers and the like my be red or some sort of black. Pacecar front bumper cover and aeronose cobra rear bumper cover. With the front I may add a splitter probably brake ducting. With the rear; modify it to keep air pockets forming and create a rear difuser. Maybe swapping the 3-piece for for one with w 3rd brakelight. A set of SVO spats. I hope to find the 82 GT black hood emblem or see if I can restore mine. I wan to rid of the antenna and using a rear mount like a newer hatch or like the new Gallants and Evos have. I plan to add a hood scoop maybe like the Capri's use. Update Jan 25 2008: I think the red will be Ford paont code E4.
As for outside electrics I plan on replacing any bulb that can be swapped out with an LED. What I'm thinking about doing is using a certain tire shine to bleach half the lense for the parking lights for the Euro look, maybe. I also want E-code headlights but I dont know if freeform lights are better for hi or lo beams and I have the same question for parabolic headlights. And then theres projector lenses. That being said; I am gonna use HIR bulbs plus for the foglights yellow lenses and bulbs. I am gonna modify the SN-95 Sequencial kit to work with my tail lights since the only difference is the SN-95s all have 3 brake light/blinker. If I can't find the headlight louvers(pg8) then I'll just use a set of lexan covers that will slide in, when the hood is open. I am going to have sequencial tail lights.
Another thing I'm considering is having special glass made for it. And a wide body kit but only by like 3 or 4 inches not going into ricer demensions. Smoking reverse lenses and maybe side marker/ park light lenses. AlsoI've been thinking of incorperating copper onto the car, how on the exterior I dont know but for interior and engine bay I have an idea. And hopefully some aluminum or other lighter than steel body parts but no FB or CF. If not the pacecar airdam then the xenon airdam slightly modified with a front splitter, and the small 2x4 headlights GMs used to use as foglights. I also want a set of clear GTS or GTO headlight covers.
Delete:
Outside trim
Hopefully windshield tint.
Chrome
Drip rails
