I planned to work on the inside this winter(2006-2007), but when you start project on your car you can really stop, you need to do somethinks new. We put all the inside in black and blue ( the same blue that the outside of the car). That make a very big difference with the grey interior of the origin.
Now, we looking for a GTZ seat, that we will put in black and may be a clear light, we are also waiting for a custom dials. After that, we will work may be on the engine depending on our budget and we will may be change the solobaric L7 for a solo-x and KX2500.1 amplifier.
We receive our custom dials.
in the day
in the night
We also complete some modification on the inside, we recover the floor with bleu leather and aluminum plate. We change the installation of the amplifier in the tank.
driver side
passenger side
back
amplifier in progress
amplifier
We find GTZ seat, so we will cover in black with may be blue and we are going to installed that shortly. In fact, this seat is from a Z26 1995.
I learn to sew for covering my GTZ seat, but it is very long, I started with the back bench. that is some picture of my word in progress.
(october 2007)Finaly, with the new audio set-up (solo-x 18"), I decide to remove the back seat and I also buy a new seat in leather black and bleu
(winter 2007-2008)
New black carpet
I need to cut and Install, but before I will finish all the isolation with the dynamat and all the fiber glass of the audio system and finally make a better instalation of the new seats.
I remove all the carpet and put a new black carpet. I think to put leather on the floor was not my best move. The leather don't respire and the floor was all wet, so when a remove the carpet all the floor was recover by the rush.
I remove all the rush and paint all the floor.
And after I put the new carpet and take the time to repaint all the central consol and so make better bracket for the seat.
We make some update in the interior due to the electric mirror, so we shaved the manual mirror adjustment and we use the system of a GrandAm and put the buttom control on the middle consol.
PAGE 1: Intro
PAGE 2: Car Before
PAGE 3: Exterior and suspension
PAGE 4: Audio system
PAGE 5: You are here
PAGE 6: Under the hood
PAGE 7: event picture
PAGE 8: Futures Projects
