See page 2 for prgress pics.

My truck is a 1989 isuzu. It's powered by a 350 chevy V8 with a turbo 350 tranny. When i bought it it was a basket case. I've never seen that much bailing wire and speaker wire holding stuff together. I cut all the inner sheet metal and core support out from the firewall foreward and used round tubing to frame it in. It's a lot cleaner now. I then bought some suburban wheels and put some low pros on it for now.

After getting it cleaned up.

After driving it a couple weeks i got bored and decided to bag it. But I like to fabricate so I designed and made all my bag mounts and my entire 2-link setup.

Here's the notch and the new crossmember for the relocated gas tank.

Another pic of the notch with my 2-link bars just bolted in.

Pic of the gas tank relocated with the bags all the way up.

Air tank mounts and custom bag mounts.

Custom bag mount.

Pics of truck laid out. Before 2" drop spindles and new balljoints installed.

Back of truck almost all the way up. 15" of lift total from rear. and that's measuring at the wheel well lip not the roll pan.

Truck almost all the way up.

After driving it for a month or two I got bored again and "Slow Ride" is torn apart waiting on parts and time to work on it.

Soon to have:
Shaved and moved back firewall
Shaved floor pans (DONE)
Shaved rear cab wall (DONE)
S-10 front frame (firewall forward) (DONE)
Custom 2x3 frame from firewall back (Stock floor body drop) (DONE)
Narrowed 10 bolt
New rear suspension (DONE)
20x8.5 Centerline smoothies (DONE)
new motor (Already have)
Sheetmetal bed floor
Chopped top (Time Permitting)
Paint and body work

Pictures of my progress on the truck are on page 2.
Pictures of my old car and some friends rides I built are on page 3.