The New Custom Subwoofer Box
I had a small sealed box but now i wanna go with a ported one so i need a bigger box. The only problem is my trunk isn't flat like modern trunks.
So now im gonna build a box with a fiberglass bottom that fits like a glove.
First i put tape everywhere so the fiberglass wouldn't get stuck
Then I put down a lil oil on the tape so It wolul be easy to take out the fiberglass mold(to make a long story short next time i will use WD-40)
Then I put down a layer of resin and put matt on top of it then some more resin on top of that.
Next I wanted to put down another layer befor i took it out.
Then put more resin on top of it. And let it dry for about 3 or 4 hours
Time to take it out!!
Next cut the glass to the size of the box
Then I taped the box together and cut the sides to fit the slope of the glass
Then put the glass on top to see if everything lined up right
Now I have to get a test fit so make sure the measurements came out perfect.
Next i used a lil more fiberglass to attach the wood to the mold. Then Added a few more layers after that.
Finished with all but carpet and stuff. But here it is!!! The tape it to smooth the edges for the carpet.
BOOOOOOMIN' like a "Mug"
Now all i need is better amps
To Be Continued......................