Purchased July 05

Ford Quadravan 1984
Pathfinder built a limited number of E-350 series vans with a coil spring suspension using a Dana 60 series axle. Very rare.

Edlebrock performer intake installed. I have a set of RPM PERFORMER heads for this cherry windsor block. Everything under it is pretty much new or run though!

It sits on 35" BFG's right now. I completly stripped the interior and applied Rinho Liner on the inside floor pan.
That stuff kick's ass and is really pretty easy to use. I have a ka ka load of pic's on that project. anywho..... WHen I got this poor thing it had a blown eng and trans.

It has a MSD ign system and Optima (yellow top.)

Edlebrock performer intake installed. I have a set of RPM PERFORMER heads for this cherry windsor block.
Everything under it is pretty much new or run though!

THis is a large project. I have been getting this beast ready for the summer in tahoe. Here are a few current pics.

I have installed a brand new 5.8ltr (351W) Plant, direct from Ford. The tranny c6/transfer
case is newly rebuilt. The motor is factory with all work done by me and checked over at a local 4WD shop FOLBECK 4WD.

SO I have been tinkering around. I threw in a 2" add-a-leaf in the rear to give it a bit more payload.

I added carpet for the summer, Installed new shocks, there is a new waren 8,000lb wench in the front. I have 4 of the eight KC Hilighs installed. I am still breaking in the engine.