I took a 1 ton pickup and turned it into a 3/4 ton power ram.
It looks a little rough now, but wait and see. The frame is getting shortened 15 1/4 inch to fit a 92 shortbox. I picked up a 1988 3/4 ton 4x4 for the diffs and transfer case. The motor is well your going to have to wait a while for that one. We (my brother and I) are doing a ground up resto with everything being sandblasted and coated with por 15. And finally a 3 inch body lift should do the trick.
Sign my guestbook and let me know if you like what your seeing,or what you think I need to do. Thanks
Looks pretty rough,but I have to think positive
Easy 1 man job with a little help
A look with the 1992 box
Engine crane comes in handy
Stripped to the frame
Now what do I do?
Bolting in the reinforcing plate
Off to the sandblaster
Coated with por 15 and started assembly
Here it is 1969 383. 030 over edelbrock perfomer rpm intake with edelbrock 600 cfm carb. Painted with endura royal metallic blue.
Fits like a glove
Cabs finally on the frame. It is coated with endura primer for now. Hopefully we will be painting by September.
Finally all put back together again,now we can start the bodywork.
Finally in primer,almost ready for paint.
Painted but needs a repaint,run on fender.
Finally painted.
Here are some pictures of the unit completed.
Eagle alloys with 33" Mickey Thompsons
Hand build front bumper from scratch.
New dual exhaust with flo pro mufflers.
Finally almost done,still need pin striping and some little things.
