this page is for the engine portion of my 200sx, it is a ga16de, but i make it look good... i have bought steel braided hoses, silicone hoses, turbo, new valve cover, and then i'll prolly buy a new engine... this way i can just switch the turbo over and retune it or something, this way i at least have all the piping in the right spot for the time being, and a new turbo, rather than the stock one that would come with the motor.
before.-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-after
i have this really cheezy led light thati got for about $10 and i threw it on the hood, its about 36 big led's and they are all soldered together in some silicon. but it works even tho its really dumb looking.
NEW BRAKES
you can see my adapters that i have on there, they space it out aout an inch and a half. also it gives my car a better stance and it also help with cornering, not to mention it looks bad ass with the wheels out a little.
--------------------------------------------------------------OLD SETUP---------------------------------------------------------------
TURBO TIME
--------------------------------------------------------------NEW SETUP---------------------------------------------------------------
-----------------------------------things on the way to my house!!!-----------------------------------------------------
JWT S1 Cams (very important)
greddy e-manage system
unorthadox racing underdrive pulley--$50 EBAY!!!!!
4.)the lightweight flywheel is really going to help with the acceleration, im going to get the fidanza one because its 7 lbs, and the JWT is 11 i think.
voltage stabilizer
oil catch can
95-99 240sx (sr20deT) MAF -it lets the turbo handle more air than the GA16 MAF
intercooler kit
apexi safc 2 controller
NOS!!!!!! ($55 ebay!!!)
koyo radiator
walbro 255lph fuel pump
venom 400 performance control module
aquamist injection
steel braided brake lines
msd 50 lb injector clips
jgy fuel rail
precision 350 hp intercooler
nismo fuel pressure regulater
turbo XS diverter valve/ recirculating valve
limited slip diff (yeah its for the 1.6 lol)
-------------------------------------------------------------------------------------------------------------------------------
New 5-Speed Tranny
i think that im going to go ahead and buy this first, and then build that up (lightweight flywheel, stage 3 clutch, lsd) and then rebuild the motor (new pistons, rings, head, cams, springs, rods, gaskets, seals, etc...)
and i wanna get a b&m short throw shifter-
and a knock off veilside shift knob (lol)- 
--------------------------------------------------------------------------------------------------------------------------------------
New Pics of Everything I Have So Far
Fuel pressure regulator w/ hose($33-ebay!!!)
i wanna get rid of this one and use a nismo FPR because it utilises the stock mounting position.
greddy profec b spec 2 boost controller ($90-ebay!!!)
if you guys wanna kno how to install a header on a GA16DE than click here
i'm going for about 200hp, im guessing by the looks of the turbo it will be only about 80 extra hp, and with all the other things on this page im guessing that i could easily get there. also i plan on getting Greddy 550cc injectors, but if you guys have any other ideas for what i should do lemme kno!
just the other day i got some new red OBX radiator hoses
($56 ebay!!!)
new valve cover ($50 ebay!!!)
THIS IS WHAT I REALLLY WANT THO!!! an sr20ve with a turbo, forged pistons and rods, and also all the lightweight gears and pulleys possible, along with a 3" exhaust
Page 1-Overview
Page 2-Exterior
Page 3-Engine (You're Here Now)
Page 4-Interior
Page 5-Stuff I Need
Page 6-Audio
Page 7-Funny Stuff and Nissan Pride
Page 8-Suspension
Page 9-Stuff Wrong With The Car
Page 10-The Driver (Me)
page 11-videos
